 | Home > My Defender > Defender 90 |
 
|
|
|
| Defpuma Member Since: 10 Feb 2013 Location: Kent Posts: 84   
|
Amazing photos! Wish I lived somewhere like that. One of my favourite Landis on here. Glad to see that you have decided to keep hold of her?? What made you change your mind with regards to selling?
|
||
31st Aug 2014 8:13pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2626
|
Decided to keep it as every dealer I went too looking at new cars told me I couldn't sell it...
I still would sell it for the right price and build a overland truck but tbh if I built a overland truck it would look similar but with winch / Hannibal rack / more lights... I am however fairly against drilling body panels, the snorkel was factory fitted so didn't have much choice but like the look of it I'm really looking forward to the turbo & 6 pot brakes think I want ap racing rather than Alcon |
||
|
31st Aug 2014 8:22pm |
|
| Defpuma Member Since: 10 Feb 2013 Location: Kent Posts: 84
|
Strange that they told you that. I would of thought it would of been snapped up pretty quickly for the right price, especially with what you have done to her. Kinda glad it didn't work out that way though.
Would be really interested to hear what difference the remap and brakes make. I had Alcon disks on a Subaru years ago with pagid blue pads. They were amazing brakes and made a huge difference to the car. Bit of a different motor but was a great upgrade. What power upgrade is it going to take it to? |
||
|
31st Aug 2014 8:37pm |
|
| Fabio Member Since: 05 Aug 2011 Location: Somerset Posts: 589  
|
Great pictures and defender is
Fabio |
||
|
1st Sep 2014 9:12am |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2626
|
Main reason for the brakes is when I drive hartside pass between the lakes and Newcastle, the standard brakes fade a fair bit and the big ones look really good...
 Last edited by Likeomg on 15th Jun 2016 11:19pm. Edited 1 time in total |
||
|
1st Sep 2014 9:39am |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2626
|
just purchased a pair of ap racing 6 pots in red... due back Sunday night having them fitted monday or tuesday rather excited to say the least.
|
||
|
9th Oct 2014 11:17am |
|
| Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3753  
|
Did you use Gary's lowering kit?...I believe it's around 1"-1.5" & makes the defender sit flat. So you also used Bilstein B6, and what about an anti roll bar?....Thinking of doing this stuff myself one day. Glad you went with the AP 6 spots,...simply THE BEST. You will now need a set of 4 spots for the rear. Pickles. |
||
|
9th Oct 2014 10:59pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2626
|
yup, alives lowering kit, didn't bother with the ARB but while im at there workshop will probably purchase it
at first you wont believe the difference between stock and alive springs, makes the car sit so much nicer especially with the big wheels. don't think i'm going to bother with the rear brakes, at least not the near future. |
||
|
10th Oct 2014 4:50pm |
|
| Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3753
|
Likeomg, thank for your reply.
I've had the AP 6 spots on a previous car, like I said, they are the ultimate,..IMHO anyway. Their performance is awesome, & they "look" very good, a quality product, ..anyone looking at your car would know, "this guy puts good stuff on his vehicle",...not that that's important. I've always been of the opinion that putting such a great set of brakes on the front, thereby massively increasing their efficiency, could, in some instances, upset the brake "balance", if you don't do the rears as well.. I also think that the standard calipers look pretty ordinary compared to the AP item, so to complete the "package", & to get the best performance, I'd always fit 'em front & rear. Of course, just my thoughts, Pickles. |
||
|
10th Oct 2014 11:03pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2626
|
i might try and adapt the front calipers and put them on the rear, Ive read about that before...
probably after my next contract on board ill get the rears |
||
|
11th Oct 2014 11:30am |
|
| Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3753
|
Glad you're thinking of AP rears, "after the next contract",....it'll just complete the package,...Damn the expense!...And you will have the best brake package on the planet.
Any Pics? Pickles. |
||
|
11th Oct 2014 8:50pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2626
|
6 pot's went on today, ordered the 4 pot rears before the fronts were even fitted! will be a couple months for rears as they are special build aps.
clearance even with my big 18" wheels is about 4mm, a wheel balancing weight wouldnt even fit in the clearance...  Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
15th Oct 2014 11:04pm |
|
| Likeomg Member Since: 29 Jun 2012 Location: Lake District / Newcastle Posts: 2626
|
Click image to enlarge Click image to enlarge and me with the car Click image to enlarge |
||
|
18th Oct 2014 8:17pm |
|
| munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558 
|
a quick word of advice is to put some sort of anti corrosion stuff on the pins in ap calipers , as the steel pins seize in the ally caliper and can be a real nightmare to get out without damaging the caliper
I've had to cut the pins and get the pads out then work on getting the pins out before |
||
|
18th Oct 2014 8:30pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
