DEFENDER2.NET - View topic - Mobile Storage Solutions Superline Drawer Modification

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Mobile Storage Solutions Superline Drawer Modification

Page 1 of 1

Print this entire topic ·

Supacat

Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

2013 Defender 110 Puma 2.2 XS DCPU Keswick Green

Mobile Storage Solutions Superline Drawer Modification

These units are designed with a space saver door to the right of the unit, which creates a full-length storage area:
[URL=]

Click image to enlarge[/URL]
However, it is not possible to open the door enough to use the space when you have a vehicle with a tailgate because of the right hand tailgate bracket.

So off with the door:
[URL=]

Click image to enlarge[/URL]

and on with a template to see what needs cutting out to make the door useable:
[URL=]

Click image to enlarge[/URL]
[URL=]

Click image to enlarge[/URL]

Cut out the rectangle and re-fit using stainless bolts:
[URL=]

Click image to enlarge[/URL]
[URL=]

Click image to enlarge[/URL]

Just need to find a recessed blanking plug/grommet to finish it off, sorting though my collection, I had nothing that did the job perfectly:
[URL=]

Click image to enlarge[/URL]
[URL=]

Click image to enlarge[/URL]

Plan to use the space for a breaker bar with extension and it also looks idea for tent poles when making trips.

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

13th Jun 2014 10:33am

smb

Member Since: 15 Jan 2013
Location: Cheshire
Posts: 1232

2011 Defender 110 Puma 2.4 XS CSW Santorini Black

Good thinking

. You can also look at cutting the door and inch in from the hinge and fitting an additional hinge. A bit more work, but very good at solving similar issues. Haven't done it myself(don't need to), but saw what someone else had done.

13th Jun 2014 11:04am

Supacat

Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

Hadn't thought of that, it would be neater and more original looking - but would that narrow down the opening and make getting things in and out that little bit harder?

13th Jun 2014 11:10am

smb

Member Since: 15 Jan 2013
Location: Cheshire
Posts: 1232

It would, but only above and below the tailgate bracket as the bracket already restricts 'clear' opening. However, thinking about it you could in fact cut out a door like you have done and secure the cut out on a hinge and spring load it so it always looks as one until it touches the bracket. If you get what I mean, but could be more hassle than it is worth

13th Jun 2014 11:43am

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5425

2006 Defender 110 Td5 USW Zermatt Silver

Click image to enlarge
Just removed mine.

13th Jun 2014 1:50pm

Supacat

Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

smb wrote:
thinking about it you could in fact cut out a door like you have done and secure the cut out on a hinge and spring load it so it always looks as one until it touches the bracket. If you get what I mean, but could be more hassle than it is worth

I do - off to look for the cutout bit in the bin...

13th Jun 2014 1:59pm

Supacat

Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

Landy Andy - that's only half a job - where's your imagination & a little garage engineering!

Is that a full length one? If so does the left hand front edge catch on the tailgate support every time you open it fully?

13th Jun 2014 2:02pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum