DEFENDER2.NET - View topic - Oil change

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Oil change - plug help

Page 1 of 1

Print this entire topic ·

DefenderSTW

Member Since: 27 Nov 2023
Location: South Wales
Posts: 9

Oil change - plug help

Click image to enlarge
Afternoon guys

I’m looking to do my first oil change on the defender td5 but stopped at the first hurdle. Everywhere I look the specifications for the sump plug are 16.5mm but where I think mine is it’s a lot bigger at 18.5mm.

Is this the right plug and I’m guessing the replacement 16.5mm plug wil not be a suitable replacement. Bit strange. Seen a few videos online but they all look different.

Pics attached if someone would comment?thanks!

25th Jan 2024 2:44pm

htb2

Member Since: 02 Nov 2018
Location: aberdeenshire
Posts: 510

Mine takes a 17mm socket, they are easily stripped. So it may have been stripped before and replaced by retapping a size up and an oversize plug.

25th Jan 2024 3:45pm

DefenderSTW

Member Since: 27 Nov 2023
Location: South Wales
Posts: 9

Gotcha, thanks. Thought that maybe the case. Some videos I have seen show the sump plug on the side rather then on the bottom which is where I was a bit confused. - I may just take it to my nearest garage and let them deal with it, especially as I don't have any ramps ect, its a bit of a faff.

25th Jan 2024 4:27pm

htb2

Member Since: 02 Nov 2018
Location: aberdeenshire
Posts: 510

Where in S. Wales as I am moving near Llandovery?

25th Jan 2024 4:32pm

DefenderSTW

Member Since: 27 Nov 2023
Location: South Wales
Posts: 9

PM'd you. I am local to Llandovery!

25th Jan 2024 5:26pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Your sump plug looks original to me. Get the engine nice a warm before trying to undo it, much easier to get it moving.

When you get the sump plug out you might want to think about a magnetic version as a replacement https://www.lrparts.net/lrc1512-super-magn...00040.html

25th Jan 2024 5:34pm

DefenderSTW

Member Since: 27 Nov 2023
Location: South Wales
Posts: 9

Nice plug thanks! I will certainly invest as that looks like a lovely peice of kit.

I am cautious because of the difference in size to everywhere else I read. The sump plug replacement is Britpart TRL100040

https://www.lrdirect.com/trl100040-sump-plug-td5

I don't have .5mm sockets so my 17mm fits over the replacement plug I have, but in comparison I have to select a 19mm to fit around the plug already in the car.

Once I solve the plug issue, yes - good tip! I'll go around the block and give it 30 mins to cool down thanks!

25th Jan 2024 5:45pm

Leamreject

Member Since: 19 Dec 2020
Location: Middle Earth - Leamington Spa
Posts: 957

And don’t forget to replace the crush washer

Ride like you stole it!!
If I’m not on a bike it’s because only a 4x4 will do…
2011 2.4 Puma 90 HT

25th Jan 2024 5:47pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

You don't need a washer, just use a 3 foot breaker bar and really torque it up tight

[Joking obviously]

25th Jan 2024 5:48pm

Screbble

Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2056

2004 Defender 90 Td5 XS CSW Zambezi Silver

And when you’ve got it removed - https://www.difflock.com/drain-plug-m14-x-1-5-t11-5

25th Jan 2024 9:42pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum