 | Home > Maintenance & Modifications > will tdci rear seat belt mounts for in a 2006 td5? |
 
|
|
|
| andycowman Member Since: 22 Jan 2025 Location: devon Posts: 24   
|
Looks like I need the puma vertical bar at the back to mount the reel to, the reels and the chassis mounted bracket underneath to sort the other end. Or spredder plates?
|
||
29th Oct 2025 11:53pm |
|
| Cragster69 Member Since: 15 Jun 2021 Location: Scotland Posts: 257  
|
Spreader plates are for the old style lap belts.
I don't know enough about the TD5 Chassis, the Puma Chassis needs this part (YRM 302) other parts from other suppliers may be available  Click image to enlarge This one is from YRM, it secures the bottom part of the seatbelt through the tub and anchors the seatbelt to the chassis. Click image to enlarge Craig. “Don't believe everything you read on the internet.” ― Abraham Lincoln www.scotgrc.co.uk |
||
|
30th Oct 2025 8:43am |
|
| andycowman Member Since: 22 Jan 2025 Location: devon Posts: 24
|
Ah I see - thanks! I miss understood that photo last night, now I get it. I do need that to fix the seat belt itself in place.
|
||
|
30th Oct 2025 8:51am |
|
| TexasRover Member Since: 24 Nov 2022 Location: Paris Posts: 1373  
|
So the step down in the rear wheel well is puma spefic I believe. My Td5 is just a square box
|
||
|
30th Oct 2025 12:01pm |
|
| andycowman Member Since: 22 Jan 2025 Location: devon Posts: 24
|
Yes it looks like this to allow the fitting of rear seats they used - so can be added in. I am doing something a little bit different but want rear belts like that.
https://www.defender2.net/forum/post639019.html I found a set of the brackets and it looks like its easy enough to adjust them to sit flat to the td5 inner bit and give the seat belt mounting. |
||
|
30th Oct 2025 12:07pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
