↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Broken power steering bracket
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
hjellemorten



Member Since: 03 Oct 2022
Location: Bergen
Posts: 32

Norway 2007 Defender 90 Puma 2.4 HT Rimini Red
Broken power steering bracket
I found my power-steering pump loose and bracket broken on my 2007 Defender 2.4.

It looks like the workshop, when with the previous owner, didn’t tighten the fasteners properly: several screws were loose (one was broken, one missing) and the loose screws were 5 mm shorter than listed as far as I can see according to the on the item list on Scuderia.

I’m looking into replacing the bracket and was informed by Jaguar & Land Rover Classic Parts that QVU500360 has been superseded by LR031916. I have googled the part number and it sees like the broken section is no longer there 🙄.

Can someone confirm that LR031916 does not include the broken piece present on my bracket? If it’s the same design, it would make more sense to reinstall the existing bracket with the correct screws and torque. Unfortunately, Jaguar & Land Rover Classic Parts, could not confirm 🤔.


Click image to enlarge
Post #1076550 30th Sep 2025 12:43pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums