↓ Advertise on Defender2 ↓

Home > 130 > Solved: 130 TD5 Pick up fuel pump access
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
freccia



Member Since: 27 Apr 2025
Location: alentejo
Posts: 1
Portugal 
Solved: 130 TD5 Pick up fuel pump access
"Has anyone cut a fuel pump access hole in the bed of a 130? If so, dimensions? TIA"

Answered this myself.

If anyone's interested, on my 2004 130 Crew Cab TD5 16P, the center of the fuel pump is located ±80 cm forward of the end of the bed (tailgate open), ±62 cm left of the right side wheel well (facing forward, from above). Made a ±35mm hole to look, was pretty much on center, then cut a ±30 cm access hole.

Successfully replaced the fuel pump- arduous task in that replacing the retainer ring requires compressing the spring-loaded pump while trying to re seat the ring.

Now need to find or fab a piece of currugated aluminum to cover the hole.
Post #1066468 27th Apr 2025 5:59pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums