DEFENDER2.NET - View topic - Cable Routing for Mobile Charger

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > General & Technical (L663) > Cable Routing for Mobile Charger

Page 1 of 1

Print this entire topic ·

seb101

Member Since: 30 May 2025
Location: UK
Posts: 12

Cable Routing for Mobile Charger

Any tips on how to route this cable through the dash keeping it hidden?

If you pull the rubber insert out of the tray just to the left of the wheel there is a hole which could be used to get it through the lower section of the dash 'tray' but I can't see any obvious way to get it through the top 'crossbar' behind the screen.

Click image to enlarge
[/img]

Click image to enlarge

24th Jun 2025 11:33am

dspuk

Member Since: 25 Oct 2024
Location: South
Posts: 52

Genuine question

Why? With carplay I’ve found no need to look at my phone or have it in front of me in that way.

24th Jun 2025 6:51pm

Crazymind

Member Since: 11 Jun 2024
Location: Glasgow
Posts: 271

Double set up for me. One on the lower centre console, good for visitors. One to the left of the wheel. I have found to the right is too distracting… and cable runs behind the screen to the dashboard c-plug.

Click image to enlarge

24th Jun 2025 10:04pm

Gareth

Member Since: 12 Dec 2011
Location: Woodford
Posts: 1132

The cross beam just pulls off. A firm tug needed. Watch for flying clips!

The centre console comes apart very easily, a few screws and you can lift it enough to pass a wire through.

I’ve done exactly what you want to do. 2021 Defender 110 X-Dynamic HSE D300 MHEV
1966 S2a 109 aka Betsy

25th Jun 2025 7:44am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum