DEFENDER2.NET - View topic - No Start/crank. Temp needle on max. No glow plug light

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > No Start/crank. Temp needle on max. No glow plug light

Page 1 of 1

Print this entire topic ·

Steve maman

Member Since: 17 Feb 2021
Location: Montreal canada
Posts: 4

No Start/crank. Temp needle on max. No glow plug light

Hi fellows.

2007 puma 110 lhd

Was driving at 80 km/h. Engine stalled.
Turning key. No cranking. Alarm working normally.
Noticed temp needle on max when ignition on.
Glow plug light doesn’t appear anymore.
Engine light doesn’t appear anymore when turning ignition on.
Fuse 38 which has to go with the ecu right pin is ground while it’s supposed to be feeding +.
Fuse 37 for the ecu as well is + without issue.
Noticed in the manual the fuse 38 goes to the glow plug relay and ecu etc. Maybe related.

Any ideas ?

23rd Jun 2024 10:32pm

steveww

Member Since: 05 Jan 2022
Location: Malton
Posts: 612

2015 Defender 110 Puma 2.2 XS CSW Bronze Green

Check the relays as well. The ECU is fed by a fuse and a relay. I don't have the wiring diagram handy to tell you which ones but I'm sure the info is out there.

27th Jun 2024 5:49pm

Esben Kold

Member Since: 14 Oct 2023
Location: Horsens
Posts: 40

2008 Defender 110 Puma 2.4 SW Galway Green

I had a similar issue when the connector on the back of the instrument had some how worked itself loose.

29th Jun 2024 7:52am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum