DEFENDER2.NET - View topic - Puma glow plug error

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma glow plug error

Page 1 of 1

Print this entire topic ·

XanaX

Member Since: 12 Oct 2018
Location: Bordeaux
Posts: 13

2015 Defender 110 Puma 2.2 Heritage Edition SW Grasmere Green

Puma glow plug error

Hi

Good morning. yesterday I wanted to start my defender puma 2.2 but impossible. Apparently at first sight battery problem. I successfully started the vehicle with my battery booster. I charged the battery. Today when I started I had an amber engine light. I used the gap diagnostic tool and I got this error P06BC-00 (2F) Cylinder 4 - Glow plug circuit - Range/performance

The Defender starts up without any problems. I looked at the 60 amp fuse which seems ok

Can someone help me? Can i keep driving?

Thanks !

1st May 2023 7:18pm

EvoErik

Member Since: 18 Dec 2023
Location: Monaco did Bavaria
Posts: 2

@xanax: have you found a fix for this error? I have the same engine, and the same error message. Car runs fine, though.

15th Jan 2024 9:20am

XanaX

Member Since: 12 Oct 2018
Location: Bordeaux
Posts: 13

Hi, yes finally it's a glow plug. 1 one the 4 was out. Replace the 4

15th Jan 2024 10:16am

EvoErik

Member Since: 18 Dec 2023
Location: Monaco did Bavaria
Posts: 2

Thanks for your reply! Yes -- with new glow plugs this error has disappeared.

16th Feb 2024 9:08pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum