DEFENDER2.NET - View topic - L663 90 Hardtop

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Modifications & Maintenance (L663) > L663 90 Hardtop - Storage Mods?

Page 1 of 1

Print this entire topic ·

Mr Fox

Member Since: 10 Sep 2011
Location: green & pleasant land
Posts: 1025

2015 Defender 90 Puma 2.2 HT Keswick Green

L663 90 Hardtop - Storage Mods?

Wondering if anyone had found any storage mods for the inside load area of the Commercial 90?

I've found the PUK folding table with the molle option but nothing else:

https://www.powerfuluk.com/collections/new...ender-l663

Has anyone found any clever off-the-shelf storage solutions for the back of the 90 Hardtop that keep the load area clear?

I'm surprised no one has done a swap out for the rear armrests, that gives you some kind of molle or pouch storage.

21st Jan 2024 5:02pm

Moo

Member Since: 01 Oct 2021
Location: Bath
Posts: 1035

I have these side storage bins from eBay in my standard 110 which work a treat.

Click image to enlarge

Click image to enlarge

I also have a shelf from 4x4 Overland with makes the boot space more usable and a door table.

Click image to enlarge

Click image to enlarge Eiger Grey MY23 D250 SE with bits. Known as Noddy.

21st Jan 2024 7:07pm

Clemmo

Member Since: 03 Aug 2012
Location: Mile Oak
Posts: 1191

2010 Defender 90 Puma 2.4 HT Stornoway Grey

https://www.defender2.net/forum/topic90780.html

My solution..cheap n easy

Clemmo Make today a little better than yesterday but not so good as tomorrow....
Defender 90 HT............Pangea Green
BMW X3 Msport............Carbon Black
Mini Electric................Grey. (wow!)
MGB Roadster……..........Vermillion
Honda Benly CD200....Maroon ------------- Chausson 98.........7.5m of fun

21st Jan 2024 8:07pm

Mr Fox

Member Since: 10 Sep 2011
Location: green & pleasant land
Posts: 1025

Thanks Moo - the issue I am finding is most of the 110 options don't work with the 90HT

Clemmo - saw your solution and you've done a great job but I'd rather keep any items on the bulkhead and sides; hence hoping to find some off the shelf solution.

Worst case, I may try and engineer something that works with molle fittings but that will take time!

21st Jan 2024 8:59pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum