↓ Advertise on Defender2 ↓

Home > Technical > Switch connector crimp tool
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
srod



Member Since: 20 Mar 2015
Location: Argyll
Posts: 190
Switch connector crimp tool
Can anyone please tell me the correct crimp tool required for the terminals on switch connector YPC10524 (which plugs into the heated window switch).

https://defenderupgrades.co.uk/product/ypc...-contacts/

Looks similar to Molex style, maybe slightly larger?

Cheers!
Post #973675 6th Dec 2022 8:19pm
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3208
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Have crimped many terminals, albeit never for a Defender. Have one very similar to this, and worked a treat every time. https://www.amazon.com/TUBTAP-Crimping-Connectors-0-5-1-5mm²-Terminal/dp/B09GYFKT6F

It is important that the wire is stripped correctly. The outer part of the crimp goes over the plastic insulation to have a good mechanical anchor. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #973715 6th Dec 2022 10:02pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 19574
United Kingdom 
Without spending a fair bit of money for a dedicated tool you should be able to use a pair of basic uninsulated crimp tool pliers.

I start the crimp on the sheath crimp a little but not completely crimp it just close the wings a little, then crimp the conductor, then close the sheath crimp wings.
Check the conductor crimp again and wire is secure then ready to insert in the connector. Diesel$ Live$ Matter. ⛽️🛢️👨‍🔧🧰⚙️ RED, WHITE & BOOST! 🇬🇧
Post #973718 6th Dec 2022 10:05pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 16878
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
I seem to recall that the crimp tool for Econoseal connectors fits those (at least I think that was the one I used last time). Essentially it is incredibly similar to the one linked in Dinnu's post above, except many times more expensive.

The cost of tools such as the one in Dinnu's link is now so low that there really is little point trying to effect a good crimp by other means, you'll never get a result as satisfactory.
Post #973733 6th Dec 2022 10:43pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums