DEFENDER2.NET - View topic - Puma bulkhead thread size?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma bulkhead thread size?

Page 1 of 1

Print this entire topic ·

Paul K

Member Since: 01 Dec 2013
Location: Eastern Oregon
Posts: 59

1985 Defender 90 V8 Petrol SW Alpine White

Puma bulkhead thread size?

All:

Where can I find out what the thread pitch is on all the captive bolts on a Puma bulkhead? My (new, factory/OEM) bulkhead has been through hell & back due to failed galvanizing, epoxying & painting, so now the threads are all clogged. If you can point me to where I can find out out what thread is what, I can get some dies and clean them up.

Thanks in advance.

Paul.

3rd Jul 2021 11:03pm

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 603

2007 Defender 90 Puma 2.4 HT Aintree Green

All the studs (bonnet release mechanism and all the ten or so wiring retainers) are m6 x 1.0

3rd Jul 2021 11:42pm

Paul K

Member Since: 01 Dec 2013
Location: Eastern Oregon
Posts: 59

Turns out the 6 captive bolts that hold the dash support are M8.

I presume the rest (including captive nuts for wiper motor) are M6x1? 1985 Land Rover Ninety SW. Puma dash, LS engine, 6-speed auto.

4th Feb 2022 4:51pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum