DEFENDER2.NET - View topic - Ultrasonic cleaning baths

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Off Topic > Ultrasonic cleaning baths

Page 1 of 2

Print this entire topic ·

Joe the Plumber

Member Since: 18 Dec 2013
Location: Midlands
Posts: 907

2014 Defender 110 Puma 2.2 HT Fuji White

Ultrasonic cleaning baths

I've been pondering over whether to buy an ultrasonic cleaning bath to use on various vehicle bits and pieces.

Initial searches on Google made them seem very reasonably priced and I was about to buy one, when I discovered nearly all of them are made in China, probably in the same bloke's shed (they all look very similar), and they seem to have a reputation for lasting very well, right up to the point that you first switch them on!

European and British made ones are available, and with very tempting specs, but with decidedly untempting price tags for something that won't be used that often.

Does anyone have any experience of them please, and any recommendations.

Thanks folks.

12th Oct 2021 10:43am

kenzle8a

Member Since: 12 Feb 2020
Location: None
Posts: 1074

like most things there some good Chinese ones and some less good, same for British / EU made stuff. With something like this given how often your going to use it would it not be more cost effective in sending the parts out to be cleaned by a speaslcist?

12th Oct 2021 10:55am

Supacat

Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

2013 Defender 110 Puma 2.2 XS DCPU Keswick Green

I've got one of these in the back of a cupboard somewhere, I wonder if it can be used to clean small parts?

12th Oct 2021 11:04am

Joe the Plumber

Member Since: 18 Dec 2013
Location: Midlands
Posts: 907

I like the idea of cleaning them in Guinness. You could drink it afterwards too (you'd never notice the difference). Very environmentally friendly!

Yes, sending stuff away to be cleaned would make good sense, but buying tools to me is like buying shoes to my wife, so a purchase is far more appealing.

Any idea which of the Chinese ones are decent please? Thanks.

12th Oct 2021 11:15am

Silver Back

Member Since: 11 Jun 2015
Location: Lincolnshire
Posts: 405

1998 Defender 110 300 Tdi HT Coniston Green

Hi Joe,

I bought one from China a few years ago, specifically to clean carbs off motorbikes.

It works OK but the items you put in need to be reasonably clean to start with and it helps to use some form of detergent in the bath along with the warm water.

I left the carb in for a lot longer than I was expecting (several hours if I remember correctly) but it did come out clean and importantly with the blocked jet clear. So overall a good result.

If you do buy one it's worth checking how many ultrasound transmitters (?) they have in the bath. Mine was slightly larger than the smallest and had 4. Some of the same size only had 2, so I'm assuming these would be less effective or take longer to clean. I also went for one with an inbuilt heater which probably helped bearing in mind the length of time the part was in it.

Hope this helps.

Andy.

12th Oct 2021 11:23am

Joe the Plumber

Member Since: 18 Dec 2013
Location: Midlands
Posts: 907

Thanks Andy, that's all welcome advice.

12th Oct 2021 11:24am

rockster57

Member Since: 15 Nov 2014
Location: West Yorkshire
Posts: 937

2011 Defender 110 Puma 2.4 CSW Zermatt Silver

A while back Aldi had ultrasonic cleaners on a cheap "special buy" deal. I decided to give one a go for motorcycle carb/jet cleaning since it was a low cost "chuck away" investment. No idea where these were made but China is a distinct possibility these days. Anyhow, it did the job I required of it and it's still fit for service for the next time I need it.

12th Oct 2021 4:53pm

Joe the Plumber

Member Since: 18 Dec 2013
Location: Midlands
Posts: 907

Thanks. I have got a tiny one from Aldi but it's too small for the stuff I want to clean. It did seem to work well though.

Last edited by Joe the Plumber on 12th Oct 2021 5:16pm. Edited 1 time in total

12th Oct 2021 5:02pm

rockster57

Member Since: 15 Nov 2014
Location: West Yorkshire
Posts: 937

I'm wondering whether these might be available to hire for short periods via tool hire outlets? Maybe you could "save up" parts then get them all cleaned over a short rental period?

12th Oct 2021 5:05pm

Joe the Plumber

Member Since: 18 Dec 2013
Location: Midlands
Posts: 907

A nice idea, but I like buying tools unfortunately!

12th Oct 2021 5:17pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16857

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

I bought a "DK Sonic" 3l cleaner form Amazon in January, and it seems to do what it says on the box.

12th Oct 2021 8:07pm

markb110

Member Since: 22 May 2010
Location: Guildford
Posts: 2520

I put some items in the dishwasher.........got told off, wont do it again..

12th Oct 2021 8:20pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16857

Just don't get caught!

12th Oct 2021 10:49pm

Joe the Plumber

Member Since: 18 Dec 2013
Location: Midlands
Posts: 907

Sadly I'm only a plumber, not an electrician, so we can't afford a dishwasher....

13th Oct 2021 4:14am

Race.it

Member Since: 27 Aug 2019
Location: Algeciras
Posts: 741

2010 Defender 110 Puma 2.4 SW Alaska White

What I do know is the 60cm dishwashers are better than the 45cm the alloys fit better… Searching for my first Defender...and started just as Covid hit, so talk about timing.

5 months after starting the search I found it, and here is the details

13th Oct 2021 7:51am

Page 1 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum