DEFENDER2.NET - View topic - Front Wing Skin Removal 2014 puma

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Front Wing Skin Removal 2014 puma

Page 1 of 1

Print this entire topic ·

big110

Member Since: 02 Nov 2016
Location: Sweeden
Posts: 342

2014 Defender 110 Puma 2.2 SW Keswick Green

Front Wing Skin Removal 2014 puma

Getting the last bit of the safety devices front external windscreen hoop installed and SD is Recommend removal of the front wing outer “skins” to access mounting points etc.

I’m looking for a step by step on how they are to be removed. Can’t be worse than the gullwing window install ahahahah

Thank you mates!

9th Jul 2021 3:44pm

markb110

Member Since: 22 May 2010
Location: Guildford
Posts: 2534

It’s all nut and bolts.

Take the wheel arches off first. Buy replacement clips from Halfords or eBay, don’t go to LR, way too expensive.

Basically find the fittings and undo.

When I did mine (Performance and Protection on my 110 and Safety Devices roll cage on the current 90 HT) there was one fitting towards the windscreen I struggled with on both vehicles. By the time you have the other fittings out there was enough room to get a hacksaw blade in a I cut it off. I am pretty certain that I never replaced it either .

Sorry I can’t give you more than that. It’s not hard, just a case of working your way round.

Might be worth looking at some of the galleries on the Devon 4x4 website as that have fitted a number of roll cages .

Good luck. It’s a job I enjoyed doing

9th Jul 2021 4:33pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum