↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Help! with new Moto Lita Steering Wheel
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Leathers



Member Since: 14 Aug 2019
Location: New Forest
Posts: 26
United Kingdom 2008 Defender 110 Puma 2.4 XS CSW Galway Green
Help! with new Moto Lita Steering Wheel
Guys, I’ve just fitted (after a 9 week wait) my shiny new Moto Lita Steering Wheel on a new 48 spline boss. All seems fine but I’m concerned that the bolt isn’t all the way through the retaining nut. It’s on tight but as you can see in the picture it’s not even flush. Thoughts? I’m pretty certain I’ve got the indicator cancelling stalks at the right length. I think the boss aperture is flush with where the central bolt/column flares out below the threaded section. The boss itself is only a couple of millimetres clear of the column shroud anyway. I don’t think it’s going to pop off but I’m still a little concerned.

Click image to enlarge


Click image to enlarge
Post #897830 12th Apr 2021 9:52pm
View user's profile Send private message View poster's gallery Reply with quote
mwestcrew



Member Since: 09 Dec 2019
Location: South Warwickshire
Posts: 216
United Kingdom 2011 Defender 130 Puma 2.4 HCPU Baltic Blue
Something not right there. I’ll take a picture of mine tomorrow 2011 130 Utility Body
2005 110 Van
Post #897838 12th Apr 2021 10:32pm
View user's profile Send private message View poster's gallery Reply with quote
Leathers



Member Since: 14 Aug 2019
Location: New Forest
Posts: 26
United Kingdom 2008 Defender 110 Puma 2.4 XS CSW Galway Green
Thanks mate, that’d be really useful. Having done some more Googling, I reckon I might know where I went wrong. I bought the Boss from Mudstuff (nothing against them) following their guide which doesn’t mention taper. Having checked the Moto Lita website there is such a thing as deep taper for some 2008 Defender Bosses, which is what I reckon the issue might be. So new steering wheel off tomorrow and taper measuring for me, and then probably a tricky phone call to Mudstuff....
Post #897843 12th Apr 2021 10:52pm
View user's profile Send private message View poster's gallery Reply with quote
markb110



Member Since: 22 May 2010
Location: Guildford
Posts: 2520
England 2002 Defender 90 Td5 HT Epsom Green
Mines the same

Had it a number of years now with no issues. You can always add some lock title if concerned.
Post #897874 13th Apr 2021 7:33am
View user's profile Send private message View poster's gallery Reply with quote
Leathers



Member Since: 14 Aug 2019
Location: New Forest
Posts: 26
United Kingdom 2008 Defender 110 Puma 2.4 XS CSW Galway Green
So I’ve spoken to Mud and Moto Lita, who were both really good. Turns out they think I do need a Deep Taper Boss - B45 LR. Which is what Mud thought they were supplying, but they got a batch of standards by mistake - B45. Mud are sending me a replacement for free, and I’ll post to hopefully say that the nut is a bit further on the bolt. Mark, might be of interest to you, but if you’ve lock tighted the nut on I suppose it won’t be going anywhere!
Post #897917 13th Apr 2021 9:50am
View user's profile Send private message View poster's gallery Reply with quote
markb110



Member Since: 22 May 2010
Location: Guildford
Posts: 2520
England 2002 Defender 90 Td5 HT Epsom Green
Thanks for the heads up Leathers.

On another note, if your top cap starts moving or feeling loose put a single strip of electrical tape on it then push it into place.

Still easy to get out but more secure and stops the logo doing its own thing.. Thumbs Up
Post #897944 13th Apr 2021 11:51am
View user's profile Send private message View poster's gallery Reply with quote
Leathers



Member Since: 14 Aug 2019
Location: New Forest
Posts: 26
United Kingdom 2008 Defender 110 Puma 2.4 XS CSW Galway Green
Turns out I did need the deeper boss! Arrived, fitted and all good now. Although apparently the missus doesn’t like the new steering wheel..

Click image to enlarge
Post #898630 16th Apr 2021 2:35pm
View user's profile Send private message View poster's gallery Reply with quote
boxoftricks



Member Since: 06 Feb 2019
Location: Home Counties
Posts: 745
United Kingdom 2011 Defender 110 Puma 2.4 USW Zermatt Silver
Keep the wheel, change the missus Rolling with laughter
Post #898634 16th Apr 2021 2:48pm
View user's profile Send private message View poster's gallery Reply with quote
markb110



Member Since: 22 May 2010
Location: Guildford
Posts: 2520
England 2002 Defender 90 Td5 HT Epsom Green
To brighten up the wheel a bit, I removed the black slotted bolts and replaced them with stainless steel Allen head bolts.

Sorry no pictures, but personally I think that it looks better instead of everything being black.

Very Happy
Post #898644 16th Apr 2021 4:53pm
View user's profile Send private message View poster's gallery Reply with quote
Leathers



Member Since: 14 Aug 2019
Location: New Forest
Posts: 26
United Kingdom 2008 Defender 110 Puma 2.4 XS CSW Galway Green
Nope. She doesn’t like it, I tried to negotiate for a 15” version but lost that argument

Click image to enlarge
too, so it’s now for sale! Anyone interested?
Post #898739 17th Apr 2021 10:26am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums