DEFENDER2.NET - View topic - error code p037d

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > error code p037d

Page 1 of 1

Print this entire topic ·

nicolas0505

Member Since: 23 Dec 2020
Location: briançon
Posts: 79

error code p037d

hello

Hello

following the intermittent starting problem in another topic. I just had the problem, I disconnected and reconnected the glow plug relay and that gave me the fault code p037d. could it be related to my intermittent starting? Thank you for your answers

9th Feb 2021 9:43pm

dazzling1611

Member Since: 08 Jun 2020
Location: morpeth
Posts: 35

2011 Defender 90 Puma 2.2 HT Bronze Green

yes it sounds like a glow plug fault, check the feed into the glow plugs from the relay is ok , then check the resistance on each glow plug.

its either a electric issue or faulty glow plugs.

13th Feb 2021 8:58am

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

2.4 puma engine glow plug cct have feed back too the ecm, if the glow plug relay is removed and ecm call for glow plug no feed back will be given and DTC p037d will be logged also blown fuses in this cct will stop relay from closing and DTC p037d will be logged

pos 2012 2.2 engine puma glow plug cct have glow plug ECM

also check resistance on each glow plug. proxy 0.9 ohm each

13th Feb 2021 9:17am

nicolas0505

Member Since: 23 Dec 2020
Location: briançon
Posts: 79

I put another relay twisted a little the legs and for the moment it works

14th Feb 2021 9:08am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum