DEFENDER2.NET - View topic - On board air system

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > On board air system

Page 1 of 1

Print this entire topic ·

2010Blackdefender90

Member Since: 07 Jan 2018
Location: London
Posts: 562

2011 Defender 90 Puma 2.4 SVX Station Wagon Santorini Black

On board air system

Based on the “wifey system” mine is now up and running on the Defender.

Really simple to do, if you take your time and ensure the connections are tight.

Got fed up with carrying all the extra hoses, pressure gauge, and the time it took to air down, and then air back up 4 tyres.

On the front, my two schrader values are hidden by the A bar, can only be seen from the side, but easy to get to. My tubing routes go from passenger front, to driver front, joins up with a “t” and then down the chassis rail to the wheel arch, “T” off across the centre cross member to the passenger side rear, and “T” off to the driver side rear.

Click image to enlarge

Click image to enlarge

From where they meet before they “T” off, the tubing goes up into the wheel arch, through a grommet and up through the side fill panel for the draw system to meet the control system.

Click image to enlarge

Click image to enlarge

My routing had to go this way because of where I mounted my dual compressor, which I’ll hide behind a panel, waiting on the carpet. I have gullwings, that’s why my control, pressure gauge, release value are installed the way they are.

The rear valves are on brackets, rivnuts, into the rear tub, not a big fan of drilling the chassis.

All I need to do now, zip tie everything down and cover with conduit in exposed areas, but keeping the tubing on the top of the chassis rails, keeps it out of harms ways

Timings.

Air down all four tyres from 38 psi to 20 psi, 48 seconds by pulling up on the release value, blue slider, 2 in from the left
Air up all four tyres, 20 psi to 38 psi 2 mins 08, turn on compressor and turn the value, far left, and watch the pressure gauge.

Click image to enlarge

All four wheels have tubing connected to simple speed lock values, hold, push, locked, wheels have these whips made up, which are stored away under the draw side fill panel. No more pressure gauges, long hoses, or value stem removers.

It’s so simple, it’s brilliant.

Click image to enlarge

Most of the parts he lists in description on the video are available in the U.K. or via Amazon in the states, who ship and add the customs charges, but you can source them, just make sure they are all 1/8” NPT fittings.

I have a bag of values, push fit connectors, enough tubing to a 90 or 110, 4 schrader values, a tube cutter, Teflon tape and two spare rear valve brackets if anyone wants to buy them, £50 all in. All you need to do is source the small air manifold, a pressure gauge, release value slider, and pressure release value.

Click image to enlarge

Everything fits to 8mm push fit connectors and 1/8” NPT fittings.

28th Nov 2020 1:59pm

Badger110

Member Since: 06 Feb 2018
Location: South hams
Posts: 1025

2011 Defender 110 Puma 2.4 USW Buckingham Blue

This is a brilliant idea and well executed

Am i right in saying it equalizes the system as you deflate/inflate?

Also i would be interested in what you have left, as i will be hard fitting my compressor for the lockers and tyre duties soon

28th Nov 2020 7:04pm

2010Blackdefender90

Member Since: 07 Jan 2018
Location: London
Posts: 562

Thanks

Yes, it does equalise the pressures, as he mentions in the video, wait a minute for the pressures after you stop in/deflating.

Tubing, blue, schrader values, 4, all compression fittings, everything to install the tyres to schrader whips x 4

All push connectors and t / y connectors. And two rear schrader mounting plates.

All the gubbings for the control values you will need to get, plus the 18” flexible pipe / hose from the compressor to the manifold. Basically this

Click image to enlarge

28th Nov 2020 7:11pm

2010Blackdefender90

Member Since: 07 Jan 2018
Location: London
Posts: 562

Badger110 wrote:
This is a brilliant idea and well executed

Am i right in saying it equalizes the system as you deflate/inflate?

Also i would be interested in what you have left, as i will be hard fitting my compressor for the lockers and tyre duties soon

Oh forgot to mention, I have the arb manifold, which supports lockers, unused, if you want that thrown in?

28th Nov 2020 7:46pm

Zed

Member Since: 07 Oct 2017
Location: In the woods
Posts: 3021

2010 Defender 110 Puma 2.4 XS CSW Santorini Black

Very tidy installation. Like that a lot. WARNING.
This post may contain sarcasm.

28th Nov 2020 8:21pm

Badger110

Member Since: 06 Feb 2018
Location: South hams
Posts: 1025

2010Blackdefender90 wrote:
Badger110 wrote:
This is a brilliant idea and well executed

Am i right in saying it equalizes the system as you deflate/inflate?

Also i would be interested in what you have left, as i will be hard fitting my compressor for the lockers and tyre duties soon

Oh forgot to mention, I have the arb manifold, which supports lockers, unused, if you want that thrown in?

Yes please, i'll PM you to keep the thread clear

28th Nov 2020 8:38pm

Lightwater

Member Since: 28 Jun 2020
Location: Sydney NB
Posts: 61

A great twin setup you have, the ARB compressors are brilliant.

I wanted a bit more so added a third compressor. The output at the compressor gets seriously hot, adding heat sinks you can still touch the output without burning yourself.

With 3 compressors you get enough air with water for cleaning, or just air by itself there is enough for blowing dust out of the car.

Moisture trap, it is surprising how much moisture there is on a humid day.

Click image to enlarge

3rd compressor in Freelander wheel well & 4L tank (a tank if cool will act a bit like a moisture trap).

Click image to enlarge

2 of my compressors under seat.

Click image to enlarge

Internal & external heat sink also fan cooled.

Click image to enlarge Visitor - Freelander owner

1st Dec 2020 6:44am

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 7687

2011 Defender 110 Puma 2.4 USW Stornoway Grey

i use Tmax single and double head compressors on my onboard air installs, seem to do the job well and the original design was made for pumping up more than 1 tyre. the early ARB pumps were for lockers etc and didnt really like pumping up tyres hence the later twin piston etc etc variants. Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop

1st Dec 2020 12:21pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum