 | Home > General & Technical (L663) > Tow bar query |
 
|
|
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11240   
|
Can you post a picture? Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
26th Oct 2020 3:21pm |
|
| jddisco200tdi Member Since: 22 Jul 2008 Location: Melbourne, Australia Posts: 21  
|
This may help
https://www.ownerinfo.landrover.com/docume...c/G2392149 Regards John D - Defender 110 2.4 |
||
|
27th Oct 2020 1:42am |
|
| Tim in Scotland Member Since: 23 May 2007 Location: The Land that time forgot Posts: 3750 
|
Here is the UK instruction page from the iGuide. It’s in 2 sections because it’s a long page in the iguide. It seems that you have to unlock the piece you describe before removing it to fit into the receiver. Your dealer should be able to show you how to set it up.
 Click image to enlarge Click image to enlarge Pangea Green D250 90 HSE with Air Suspension, Off-road Pack, Towing Pack, Black Contrast roof , rear recovery eyes, Front bash plate, Classic flaps all round, extended wheel arch kit and a few bits from PowerfulUK Expel Clear Gloss PPF to come 2020 D240 1st Edition in Pangea Green with Acorn interior. Now gone - old faithful, no mechanical issues whatsoever ever but the leaks and rattles all over the place won’t be missed! |
||
|
27th Oct 2020 3:45am |
|
| KBKLR Member Since: 16 Jul 2020 Location: Aberdeenshire Posts: 15
|
That also confused me. It is a bit of effort once the key is in to hold the tower and turn the green part until the locking balls retract far enough for the piece you refer to to move allowing the tow bar to engage - so follow the instructions sent to you by the other posters. Don't cut the plastic bit off.
|
||
|
27th Oct 2020 2:03pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
