↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > 3rd row seat bolts
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
AMBxx



Member Since: 24 Jul 2016
Location: York
Posts: 1066
United Kingdom 2015 Defender 110 Puma 2.2 XS CSW Orkney Grey
3rd row seat bolts
Just used a magical bolt remover to free 2 stuck bolts holding the 3rd row seats in place.
Now i need to buy some replacement bolts - preferably not torx. And the nuts for the daft bit that sticks through the floor.

Does anyone know the correct size? Any reason I should use torx? Is stainless steel suitable?

Thanks.
Post #860956 11th Oct 2020 12:56pm
View user's profile Send private message View poster's gallery Reply with quote
Ianh



Member Since: 17 Sep 2018
Location: Essex
Posts: 2425
United Kingdom 
I would avoid stainless bolts due to galvanic reaction and I expect they need to be high tensile bolts for seat mountings. I would go for quality galvanised High tensile bolts and nuts and smear with a good quality grease such as Morris K48 to protect from water , salts etc and avoid galvanic reaction . you can get in tubs cheaply.

See write up by gwyn Lewis https://gwynlewis4x4.co.uk/product/morris-...artridges/ on K48, I’ve found it a very good grease.
Post #860959 11th Oct 2020 1:21pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums