↓ Advertise on Defender2 ↓

Home > Wheels & Tyres (L663) > Spacers
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
rgeezzy



Member Since: 09 Jul 2021
Location: 44147
Posts: 10

United States 
Spacers
Defender 110X with 22" rims/tires

Bought and installed spacers, staggered setup of:
Fronts > H&R DRM 20mm spacers - black
Rears > H&R DRM 25mm spacers - black

https://shop.redline360.com/products/h-r-w...-45mm-50mm

Looks perfect - No rub

I wouldn't go any larger unless you're looking for an aggressive off-road look where the tires are hanging out of the well. I saw another post with 30mm all the way around, IMO too large - especially up front. IMO @ 30mm you're gonna get a ton of road debris kicked-up all over your lower gloss side panels, they chip easily.

will post pics later
Post #952178 10th May 2022 4:54pm
View user's profile Send private message View poster's gallery Reply with quote
rgeezzy



Member Since: 09 Jul 2021
Location: 44147
Posts: 10

United States 

Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge



Click image to enlarge
Post #952373 12th May 2022 2:43pm
View user's profile Send private message View poster's gallery Reply with quote
The_Liiicht



Member Since: 07 Sep 2022
Location: Angus
Posts: 19

I have ordered a set of 20mm spacers for the front hubs and 25mm for the rear (Eibach make) but I’m now wondering if they will allow me to mount my standard steelies without modification.
Won’t the hub studs protrude through the spacers too far? Especially on the 20mm Rolling Eyes Pangy 90 HSE 250 with off-roady bits 🏴󠁧󠁢󠁳󠁣󠁴󠁿 ⛰
Post #964371 8th Sep 2022 6:25am
View user's profile Send private message View poster's gallery Reply with quote
Defendit..



Member Since: 09 Aug 2020
Location: 's-Hertogenbosch
Posts: 221

Netherlands 
The studs are 27/28 mm, so with the steelies you need to shave 5 to 6mm of the studs.

I did it over a year ago with my spacers/steelies 22mm front, 25mm rear , no problem at all covered already over 10K km No Mud flaps for my 90.!
-----------------------------------------
P300 S on air, adv.+ offroad pack, DRL+fog, Dinamica Suedecloth + Ebony headliner/Cross Beam- Many Mods..
Post #964373 8th Sep 2022 6:37am
View user's profile Send private message View poster's gallery Reply with quote
The_Liiicht



Member Since: 07 Sep 2022
Location: Angus
Posts: 19

Ah thanks for the clarification. I guess that's why a lot just run a 30mm. Pangy 90 HSE 250 with off-roady bits 🏴󠁧󠁢󠁳󠁣󠁴󠁿 ⛰
Post #964378 8th Sep 2022 7:10am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2022 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums