DEFENDER2.NET - View topic - Fuel tank removal hints and tips

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Fuel tank removal hints and tips

Page 2 of 2

Print this entire topic ·

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3788

Perfect, thanks. Any ideas what the ID/OD is? I want to have it all ready to swap out.

4th Oct 2020 8:00am

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

19.34mm id and 27.50mm od

https://www.ebay.co.uk/itm/RUBBER-REINFORC...0290.m3507

this hose i used then i dropped my tank to replace cross member

Last edited by dorsetsmith on 4th Oct 2020 8:33am. Edited 2 times in total

4th Oct 2020 8:24am

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3788

Perfect, thanks.

4th Oct 2020 8:29am

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3788

Have got the hose ordered and have soaked and then removed/refitted each bolt from the guard individually to make sure I have no issues. The plan is to drop the tank next Saturday morning. Clean up all the diesel and general dirt in the area and then prime and paint the underside of the floor and the rear of the cross member that can’t be accessed when the tank is in place. I’ll leave that to dry over night and Then refit the tank Sunday morning. Simples!! I’ll do a write up for here once it’s done with pics so that others can learn from my mistakes!

4th Oct 2020 12:56pm

Page 2 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum