DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Nanocom

Page 1 of 1

Print this entire topic ·

Gaz65

Member Since: 05 Aug 2020
Location: Herefordshire
Posts: 2

Nanocom

Hi all,

Does any one know of anyone who has a nanocom who would be willing to do me a diagnostic report on my Defender's central locking for a cost obviously. Willing to go to them, I am in Herefordshire, but Gloucester not to far away neither. The problem I have is that it locks on the fob then immediately unlocks, then a few seconds later the alarm goes off.
Welcome any advice
Cheers

5th Aug 2020 8:03pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

2013 Defender 110 Puma 2.2 USW Orkney Grey

I'm not sure that a Nanocom will help with that but your problem does sound very much like a sticky mechanism in, probably, the drivers door. The grease that they were originally lubricated with tends to go hard over time and the increased resistance produces the symptoms that you describe.

Take a look inside the door, clean off the old grease and re-lubricate the linkages to see if it cures the problem.

Oh, and welcome on board. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

5th Aug 2020 9:22pm

Gaz65

Member Since: 05 Aug 2020
Location: Herefordshire
Posts: 2

LRA,
Thanks for your advice I will certainly give that a go and get back to you.

Thanks for the welcome.

5th Aug 2020 9:55pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum