 | Home > Puma (Tdci) > Revisiting Exhaust Options |
 
|
|
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3615   
|
I’ve got a twisted cat back straight through on a 2.2tdci. It looks anonymous, is very well made and sounds great. Not loud at all despite having no silencers, but sounds very smooth compared to the old one. No more sections than standard exhaust.
I’m about 10 miles north of York if you wanted a look, although I’m about 6 miles south of twisted so you might as well go all the way there! |
||
15th Jul 2020 7:39pm |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 1867  
|
I have done lots and lots of homework on this, yesterday I ordered a full 2.5”, cat shell down pipe, with sports centre silencer and a standard rolled end from Demand Engineering, I spoke to Dan (the owner) and can’t praise him enough, fantastic knowledge and a quality system from pipe to hangers. I’m really fussy and always put lots of effort in before making a decision. Lots of good feedback for them too.
Initially I wanted a 3” from Griffin but tried to contact James on many occasions but never had a reply. I was also advised that on occasions the 3” can cause the turbo to over spool and cause issues. This is the reason I went for the 2.5” 2016 Range Rover Autobiography 4.4 TDV8 2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) Last edited by bear100 on 15th Jul 2020 8:12pm. Edited 1 time in total |
||
|
15th Jul 2020 7:42pm |
|
| Pacha Member Since: 23 Feb 2020 Location: North Yorkshire Posts: 772 
|
TBH - we are not that far from Twisted!. I spoke to them a couple of days ago and they seemed pretty switched on etc. The anonymous look is important top me. Rgds. Chris |
||
|
15th Jul 2020 7:52pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10359
|
I ordered a full Demand exhaust at the beginning of this week..
Twisted i believe, buy them in. I asked Griffin if he’d do v-band clamps, he came back with ‘flanged clamps are £30 extra’... well that wasn’t what i asked for. So I went with Demand... now we wait. |
||
|
15th Jul 2020 10:17pm |
|
| Pacha Member Since: 23 Feb 2020 Location: North Yorkshire Posts: 772
|
Thanks guys.
Not hugely bothered if they are fabricated 'in house', it's more about the finished fit and end result. I am pretty much leaning towards Twisted ATM. Rgds. Chris Last edited by Pacha on 15th Jul 2020 10:33pm. Edited 1 time in total |
||
|
15th Jul 2020 10:30pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 19568
|
I would go for Alive.
 Diesel$ Live$ Matter. ⛽️🛢️👨🔧🧰⚙️ RED, WHITE & BOOST! 🇬🇧 |
||
|
15th Jul 2020 10:31pm |
|
| trailbear Member Since: 14 Sep 2016 Location: Scotland Posts: 401
|
I have a Twisted system on my 300tdi which has been on for 15yrs now, excellent piece of Engineering and still in excellent condition.
Had a look again at Twisted for my 2.2 Puma but then thought I would look at other options for comparison. I actually found the company who make Twisted systems and laughed when they gave me a quote which was over £200 dearer than buying from Twisted themselves ( I understand the concept of bulk purchasing and owning the Patent / Design ) However, I ended up buying a full system ( cat back ) from Demand Engineering, had a really interesting conversation with Dan, a hilarious bloke in my opinion. He took time to listen to what I wanted and steered me in the right direction. I went for the silencer option. What is now lying on the garage floor ( to be fitted at the weekend) is a thing of beauty, I almost don’t want to put it on the vehicle ( but I will 😬 ) He wasn’t offended when I asked for the tailpipe to be free of his company logo. Half the price of the Twisted system and comes recommended from other forum members... |
||
|
15th Jul 2020 10:49pm |
|
| DEF4 Member Since: 11 Dec 2017 Location: West Sussex Posts: 12
|
I fitted a CAT back exhaust from Demand Engineering during lockdown to my 2013 TDCI 20kmiles. It came in two parts with a small silencer in the centre section - very well made and excellent value for money!!
Overall it is very impressive. The noise from the exhaust hasn't changed much but is slightly deeper. However the main benefit is is engine performance which now feels liberated - more low down torque and improved fuel economy. Highly recommended |
||
|
16th Jul 2020 6:58am |
|
| Grenadier Member Since: 23 Jul 2014 Location: The foot of Mont Blanc... Posts: 5765  
|
But if they are made by Demand, that could be quite a saving on one bought from Twisted. They’re not famous for being the cheapest. Even if it’s just enough for some beers or dinner with SWMBO. Monsieur Le Grenadier
I've not been everywhere, but it's on my list..... 2011 Puma 110DC - Corris Grey |
||
|
16th Jul 2020 8:21am |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 1867
|
^^^^^^^^ What Grenadier says!
2016 Range Rover Autobiography 4.4 TDV8
2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) |
||
|
16th Jul 2020 8:42am |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3615
|
I must say that I love my twisted (See above), and I got a good deal on it, but if I was to but again I’d go with demand. They look to be just as good quality, but much better value than the rrp of twisted.
|
||
|
16th Jul 2020 6:23pm |
|
| Pacha Member Since: 23 Feb 2020 Location: North Yorkshire Posts: 772
|
Thanks everybody - I have made contact with Demand to ask a couple of Q's, not heard back yet.
Will have a ponder for the next couple of weeks before I place an order. Rgds. Chris |
||
|
16th Jul 2020 6:39pm |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 1867
|
Dan at Demand is in demand! His workshop manager has handed his notice in recently and running a bit behind than normal plus he’s really busy.....well worth the wait though, I’m looking forward to trying mine out!
2016 Range Rover Autobiography 4.4 TDV8
2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) |
||
|
16th Jul 2020 10:04pm |
|
| trailbear Member Since: 14 Sep 2016 Location: Scotland Posts: 401
|
He told me when I spoke to him that he was being inundated with e mail and telephone requests and
apologised for the delay in returning my call ( 2 days - not an issue as far as I was concerned ) Also that because of lockdown he was seeing a huge increase in customers turning up in person looking for quotes And work requests. As others have said, be patient, you will definitely not regret the slight wait. Even with the increase in his workload, from phone call to delivery was 7 days and I think that is quite impressive For a product that was specifically custom made for me. |
||
|
16th Jul 2020 11:01pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
