DEFENDER2.NET - View topic - Blue Sea Fusebox

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Blue Sea Fusebox

Page 1 of 1

Print this entire topic ·

trailbear

Member Since: 14 Sep 2016
Location: Scotland
Posts: 405

Blue Sea Fusebox

Gents

I would like to fit a Blue Sea Fusebox to my 2.2 Puma Defender to allow the install of future accessories
and rather than hack into existing wiring thought that it may be a good idea to have a place for both permanent live and
ignition live controlled circuits.
The question is where should I be looking at taking the feeds from for both of these circuits.
I had thought of installing the fuse box under the driver seat in order that I can fit a twin battery set up in the future.

Any advice or assistance is always appreciated.

Regards

28th May 2020 9:37pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20843

Maybe of interest, unless you’ve already got them but I’ve found the best prices to be Amazon USA for the BS Fuse Boxes. They sell directly to your door here in GB.
The are great quality too. _\Hennessey|Venom| F5/___
___\⭐️Lone|Star|State/___
____\We|Will|Win/___
____/🇬🇧🇺🇸\____
_//*⛽️🛢️⚙️🧰*\\_

28th May 2020 9:58pm

trailbear

Member Since: 14 Sep 2016
Location: Scotland
Posts: 405

Thanks for that. I haven’t got them yet so will be investigating that forthwith.

28th May 2020 10:12pm

kmac

Member Since: 07 Oct 2009
Location: Middlesex
Posts: 1317

2009 Defender 110 Puma 2.4 USW Santorini Black

I have my aux fusebox under the drivers seat.

Permanent live is from the battery box. Ran a cable along the front of the seats, through the box section over the transmission tunnel.

Switched live is from the cigarette lighter although there is another thread on here https://www.defender2.net/forum/post806050.html which shows you can piggy back-off a switched live from under the cubby. The switched live activates a relay which is connected to the battery also for the main power feed.

For an earth, I ran a new cable to the earth point under the drivers seat.

Last edited by kmac on 28th May 2020 10:16pm. Edited 1 time in total

28th May 2020 10:14pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20843

The Safety HUB 100 & 150 maybe of interest too you too.
👍🏻 _\Hennessey|Venom| F5/___
___\⭐️Lone|Star|State/___
____\We|Will|Win/___
____/🇬🇧🇺🇸\____
_//*⛽️🛢️⚙️🧰*\\_

28th May 2020 10:15pm

kmac

Member Since: 07 Oct 2009
Location: Middlesex
Posts: 1317

Took earth from here

[/url]Screenshot 2020-05-28 at 22.32.05 by [url=https://www.flickr.com/photos/152440487@N03/][/img]

There is a spare threaded hole which will take an M8 bolt

28th May 2020 10:35pm

trailbear

Member Since: 14 Sep 2016
Location: Scotland
Posts: 405

Thanks Gents
That’s the information that I was looking for, got both the boxes to go for and
the wiring advice that I was looking for.
Excellent.

28th May 2020 11:09pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum