DEFENDER2.NET - View topic - Vacuum pump oil pipe

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Vacuum pump oil pipe

Page 1 of 1

Print this entire topic ·

beardiedog

Member Since: 01 Aug 2019
Location: Northampton
Posts: 27

2003 Defender 110 Td5 G4 Challenge Tangiers Orange

Vacuum pump oil pipe

I removed the alternator at the weekend and made a bit of a mess of the little oil pipe attached to the brake server vacuum pump. The part is apparently obsolete can anybody advise on somewhere I could get a bit of pipe the same size I don't know where or what to measure. The part is apparently SQC500010

Cheers

6th Apr 2020 9:21am

rallysteve

Member Since: 10 Feb 2014
Location: Cumbria
Posts: 2196

2002 Defender 110 Td5 DCPU Keswick Green

Have a look here:
https://www.lrworkshop.com/diagrams/land-r...ator_53203

Looks like YKL100120 is the bit to me.

Cheers,
Steve 02' 110 TD5 Double Cab Rebuild Thread
84' 90 3.9 V8 Caged Pickup Build Thread - Now For Sale

Mobile Diesel Heater Build Thread

6th Apr 2020 9:36am

beardiedog

Member Since: 01 Aug 2019
Location: Northampton
Posts: 27

HI It's number 10 in the diagram the other pipe is OK I have ordered a new copper washer but it's the drain pipe I need

6th Apr 2020 9:42am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16858

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

The critical measurements are the internal diameter and the length.

It is a very simple length of (oil-resistant) rubber hose, and any hose or hydraulic pipe supplier should be able to sort you out.

6th Apr 2020 9:48am

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

The OD of nylon pipe that corners to the pipe your after is 8.84 mm. SQC500010 is 70 mm long prox

6th Apr 2020 10:23am

beardiedog

Member Since: 01 Aug 2019
Location: Northampton
Posts: 27

thanks OD do you mean outside diameter will than mean the internal will be OK or should I measure that, sorry I'm a bit clueless with this..

6th Apr 2020 10:30am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16858

I think that dorsetsmith is actually saying that the outside diameter of the pipe that the one you need fits on to is 8.84mm, so the inside diameter of the one you need should fit onto this one, so probably about 8.5mm.

I think.....

If in doubt, measure the outlet on the vac pump and the spigot on the engine, these should give you the ID for the pipe you need.

6th Apr 2020 1:31pm

beardiedog

Member Since: 01 Aug 2019
Location: Northampton
Posts: 27

OK thanks that makes sense thinking about it the outside diameter would be more than that thanks dorsetsmith

6th Apr 2020 1:40pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum