DEFENDER2.NET - View topic - wires to the heater fan control in the central console

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > wires to the heater fan control in the central console

Page 1 of 1

Print this entire topic ·

Eduardo

Member Since: 28 Aug 2008
Location: Región Metropolitana
Posts: 2109

2007 Defender 110 Puma 2.4 SW Stornoway Grey

wires to the heater fan control in the central console

I there!

I already finished to repair the heater fan control: one of the cable clips supports were broken (Cable 1 in the picture)
After put all in place appear that I mixup some of the cables or something that control the vent dampers.

I can get air in the windscreen and in the foot but not in the round blowers.

Some of you remember the order of the 2 cables labeled red and yellow (cable 3 and 4 in the picture)?
As far as I can see in the picture that I took yellow should be cable 3 and red the cable 4 is that correct?
Or Ive missing another thing?

Click image to enlarge

Click image to enlarge

Thanks! Eduardo

MY 2007 110 SW PUMA 2.4: Big Fog of 64'
MY 1994 Jayco 1207 Folding camper: "El Tremendo"

Click image to enlarge

28th Jan 2020 12:17pm

Eduardo

Member Since: 28 Aug 2008
Location: Región Metropolitana
Posts: 2109

Well,

A follow up of the problem:
Both cables are correctly located, so keep in mind the diagram when work in the area.
Red one change the position from the windscreen to the front. As far as I can see when I turn the knob the gears located in the heater noves correctly (see the picture).

Click image to enlarge

So, the only posibility is that something is broken in the heater interiorand the damper doesnt move.
Anyone with a similar problem?

Should be possible to repair or I need the complete piece? (The complete heater cost more than 300 GBP and is working fine except for that.)

My other concern the access to the heater: I need to dismantle all the fascia. It's a complex work or can be done in a weekend with normal tools?

Cheers! Eduardo

MY 2007 110 SW PUMA 2.4: Big Fog of 64'
MY 1994 Jayco 1207 Folding camper: "El Tremendo"

Click image to enlarge

29th Jan 2020 12:19am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum