DEFENDER2.NET - View topic - Drivers Windoow not Working

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Drivers Windoow not Working

Page 1 of 1

Print this entire topic ·

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

2009 Defender 110 Puma 2.4 USW Baltic Blue

Drivers Windoow not Working

I had a problem a couple of years ago were I had a broken wire going to the Window motor.
So I went for that again , wire was ok.

I appear to have 12 volts at the connector where the wires red and blue are, 12 volts all the time. When the switch is pressed the 12 volts disappears, so for down the way the Blue wire goes to 0 volts up the way the red goes to 0 volts.

I had thought it might be 0volts normally and 12 volts to move the motor but maybe I have another problem.

Is that how it should work? The Haynes manual does not have that in it.

Could the motor be seized?

Any help would e appreciated. I am reluctant to open up the left hand door as I broke some of the plastic pins.

23rd Oct 2019 12:09pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

Click image to enlarge

23rd Oct 2019 12:45pm

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

Hello Dorset smith sorry do not know your first name. Thanks for the drawing much better than mine.

I feel it of an idiot now, but it was the red wire broken.

I could not figure out why I had 12 volts on each leg. But it appears that the switch puts an earth on and allows the current to flow one way or the other.

Got it working now and just to put it all back together.

Thanks for your help..

I take it you have a proper workshop manual.

23rd Oct 2019 2:03pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

workshop manual. and so on

see links below

https://1drv.ms/b/s!AtZSoWFHDgnGjECIf_wOfqrjegKe?e=i9WBFJ

https://1drv.ms/b/s!AtZSoWFHDgnGhQoLf-ZCjkI5M0R7?e=EgqGCc

https://1drv.ms/b/s!AtZSoWFHDgnGkgFkymdMJqZgSWl5?e=pHuntr

you fond the wiring bake

23rd Oct 2019 3:47pm

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

Thanks much appreciated.

23rd Oct 2019 5:48pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum