↓ Advertise on Defender2 ↓

Home > Technical > Rear Axle Rebuild - Help
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
No 6



Member Since: 03 Jul 2018
Location: West Sussex
Posts: 65
United Kingdom 1994 Defender 90 300 Tdi CSW Coniston Green
Rear Axle Rebuild - Help
Hi Guys,

I've gone thunk myself into a corner Laughing

I have a 95 MA chassis defender 90 with disc brake rear County (original).

The axle casing is leaking from the weld and someone has cut the roll bar mounts off so I got another disc brake axle complete that I want to rebuild as it's been sitting a while. The axle code is a 42s so 93 on with disc brakes - All good.

Where I'm struggling is hubs, stub axles and bearing kits. Confused

I have x2 FTC0942 - Originally HRC1924 and matches what came off the original axle - New Hub face is larger though.

X2 FTC3154 - Stub axles - These look very different to what came off - The ones that came off have a semi circle cut out and these seem to have different internal bits and might need different bearings. The ones that came off look more like DA3198.

x2 bearing kits DA2383 - Britpart bearing kits.

Do these work together, am i a total knob or should I calm down and carry on! Laughing

Thanks in advance
Post #770528 28th Apr 2019 3:54pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums