![]() | Home > Td5 > Nanocom faults.. |
![]() ![]() |
|
|
Adam17 Member Since: 15 May 2018 Location: Within Bedfordshire Posts: 1193 ![]() ![]() ![]() |
Hi all so yesterday, I did a 45 min drive to a restaurant for dinner, Nanocom showed no faults. But the ambient pressure sensor was running average was at 102+KPA. It was running 98KPA the last time I was hooked up a few days ago..
Anyways I had it plugged in on the journey home and was all good until I got home, checked for fault codes and then these 2 came up. A friend advised that I have nothing to worry about as neither item are fitted to my truck.. ![]() Click image to enlarge ![]() Click image to enlarge So this morning I decided I was going to remove/delete the codes, but they were already gone ![]() Just lately it has been driving really well, really responsive, but in the mornings for the first few hundred yeards, its very sluggish, like I have no turbo, it even cut out 3 times. But I had no issue this morning, so all good. Any ideas why it may be misbehaving like this? Or is she just have a bad day? Happy Defendering ![]() ![]() Adam Loving The Duchess The Defender 110 TD5 XS My Defender story - http://www.defender2.net/forum/topic64005.html |
||
![]() |
|
Blackhat90 Member Since: 31 Dec 2016 Location: Forfar Posts: 86 ![]() ![]() ![]() |
I would try a new fuel filter, and check the turbo pipes . the can delaminate, and collapse on themseves ,
|
||
![]() |
|
bankz5152 Member Since: 02 Feb 2017 Location: South London/North Kent Posts: 2217 ![]() ![]() ![]() |
Thats usually down to the ABS playing up. Clear it off and drive. See if it returns
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
