![]() | Home > Maintenance & Modifications > Heater blower mounting |
![]() ![]() |
|
|
dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 ![]() |
RHD heater blower case UTP1259 Chassis VIN range: Chassis VINs from MA939976 to WA159806 (1995 to 1998 MY
RHD heater blower case JEN100240 Chassis VIN range: Chassis VINs from XA159807 to 1A622423 (1999 to 2001 MY) RHD heater blower case JEN000010 Chassis VIN range: Chassis VINs from 2A622424 (2002 MY have drink and sit down be fore you have look at the price ![]() also my be able to use later one ![]() |
||
![]() |
|
Steve_overland Member Since: 14 Oct 2018 Location: Gaydon Posts: 294 ![]() ![]() ![]() |
Eeeeeek ... that’s a lot of pennies ... may have to result to a fibreglass repair @steve_overland on Insta.
110 expedition vehicle with pop roof |
||
![]() |
|
dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 ![]() |
last one i had in that state got repair with thin sheet zintec
https://www.ebay.co.uk/itm/car-body-panel-....l4275.c10 or https://www.ebay.co.uk/itm/Land-Rover-Defe...2506524997 not my eBay Last edited by dorsetsmith on 17th Dec 2018 6:51pm. Edited 2 times in total |
||
![]() |
|
Steve_overland Member Since: 14 Oct 2018 Location: Gaydon Posts: 294 ![]() ![]() ![]() |
Looks as bad as mine hahaha ... will try the tin @steve_overland on Insta.
110 expedition vehicle with pop roof |
||
![]() |
|
Steve_overland Member Since: 14 Oct 2018 Location: Gaydon Posts: 294 ![]() ![]() ![]() |
So cut the rust away and now made the paper templates to transfer to the tin tomorrow, hopefully have it all back together buttoned up the end of tomorrow.
![]() Click image to enlarge ![]() Click image to enlarge @steve_overland on Insta. 110 expedition vehicle with pop roof |
||
![]() |
|
dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 ![]() |
![]() |
||
![]() |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8268 ![]() ![]() ![]() |
Your getting quite practical steve! Cheers
James 110 2010 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
![]() |
|
Steve_overland Member Since: 14 Oct 2018 Location: Gaydon Posts: 294 ![]() ![]() ![]() |
I feel you don’t get much choice with a defender hahaha... it’s either that or get poor getting others to do it @steve_overland on Insta.
110 expedition vehicle with pop roof |
||
![]() |
|
Mo Murphy Member Since: 01 Jun 2008 Location: Letchworth Garden City, Herts Posts: 2340 ![]() ![]() ![]() |
You mean you don't have a ''my mechanic'' ?
Mo ![]() 50 Shades of Pennine Grey |
||
![]() |
|
Steve_overland Member Since: 14 Oct 2018 Location: Gaydon Posts: 294 ![]() ![]() ![]() |
Progress today... paint and seal to do when the rain stops
![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge @steve_overland on Insta. 110 expedition vehicle with pop roof |
||
![]() |
|
Steve_overland Member Since: 14 Oct 2018 Location: Gaydon Posts: 294 ![]() ![]() ![]() |
And there it is all finished and ready to go back in.... took a bit of time but sure beats £250 for a new one
![]() Click image to enlarge ![]() Click image to enlarge @steve_overland on Insta. 110 expedition vehicle with pop roof |
||
![]() |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5964 ![]() ![]() ![]() |
Any chance of a photo showing the hole in the bulkhead where the heater outlet mates to please?
Have you been taking lesson in paper/card templates from the chaps at Project Binky on youtube? ![]() Regards John M0VAZ Econet Station 48 no clock |
||
![]() |
|
Steve_overland Member Since: 14 Oct 2018 Location: Gaydon Posts: 294 ![]() ![]() ![]() |
All back together and ready to be fitted now...
Hope it stops raining soon!!! ![]() Click image to enlarge ![]() Click image to enlarge @steve_overland on Insta. 110 expedition vehicle with pop roof |
||
![]() |
|
dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 ![]() |
Repair and reuse
![]() Last edited by dorsetsmith on 19th Dec 2018 11:23pm. Edited 1 time in total |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
