DEFENDER2.NET - View topic - Internal Chassis Corrosion Advice

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Series Land Rovers > Internal Chassis Corrosion Advice

Page 1 of 1

Print this entire topic ·

boxoftricks

Member Since: 06 Feb 2019
Location: Home Counties
Posts: 745

2011 Defender 110 Puma 2.4 USW Zermatt Silver

Internal Chassis Corrosion Advice

I have a 1966 2a with an original chassis. Well original if you ignore the new bits and pieces welded on and patched

It's only for summer use so will be no road salt issues.

The exterior of the chassis will be stripped back and painted with Por15 rust prevention and then Por15 top coat over the rear cross member etc. Then I think just ACF 50 over the top (but unsure as of yet). No need to use Dinitrol etc as for summer driving and I would like to see any areas deteriorating.

My question is what's best for internal cavities? I'm sure there will be lots of rust etc in there so need something in an aerosol or similar I can spray in. Ideally with one of the long plastic tubes you can feed in. ACF50? I want to kill the rust before using a cavity wax.

1st Jul 2023 11:23am

kenzle8a

Member Since: 12 Feb 2020
Location: None
Posts: 1074

I believe Zagatos advice to his customers is ACF50 1st to kill rust then Dinatrol ML (the light brown cavity wax) after.

1st Jul 2023 11:53am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum