DEFENDER2.NET - View topic - Help Needed From DIY Experts/Tradesmen

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Off Topic > Help Needed From DIY Experts/Tradesmen

Page 2 of 2

Print this entire topic ·

Paulv8

Member Since: 09 Jun 2013
Location: Milton Keynes
Posts: 618

1989 Defender 90 V8 Petrol CSW Alpine White

our posts crossed....

OK.

depending on the type of tile, getting through the tile can be easy or hard... if they are basic tiles, then a masonry bit will go through it.

None of the simple fixings will work, so use a spring toggle.

if you hit metal stud when drilling your hole, then use a drywall screw straight into it, if timber, then the drywall or any normsl screw will work.

when you drill through, donlt just whack the drill straight through but try and judge so that you just go through the skin... stick a bit of tape on the drill 23mm from the tip and dont go past that first try. V8 90...WIP

18th Jul 2018 9:08pm

need4speed

Member Since: 23 Nov 2012
Location: Kilmarnock
Posts: 749

Great info. Thanks Paul! 4.6 RV8 110HT

18th Jul 2018 9:17pm

Page 2 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum