 | Home > Expedition & Overland > Rapier trailer Hubs |
 
|
|
|
| TACK Member Since: 26 Apr 2009 Location: Essex Posts: 1045  |
I have recently purchased a rapier trailer, (photo below is not my actual trailer) can someone advise how i over come the issue of the protruding hub so as a can fit alloy wheels.
I can find information on Sankey trailers using spacers/hub adapters, but noting specific to the rapier trailer.  Click image to enlarge |
||
5th Apr 2018 8:55am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11240  
|
The hubs are essentially the same. To provide clearance, it's necessary to grind off the lifting rings from the hub caps.
Click image to enlarge Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
5th Apr 2018 10:47am |
|
| TACK Member Since: 26 Apr 2009 Location: Essex Posts: 1045 |
Thanks, would you still not need spacers?
|
||
|
6th Apr 2018 8:09am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11240
|
Sorry, yes, you'll still need spacers:
Click image to enlarge Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
6th Apr 2018 8:34am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
