↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Initial start up ?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Kevlar



Member Since: 28 Oct 2020
Location: Prague
Posts: 78
Czech Republic 2010 Defender 90 Puma 2.4 SW Santorini Black
Initial start up ?
Hey All

Over the last few months I have been replacing the head gasket, also had injectors checked and 2 were calibrated slightly.
Now I have the engine back together, I have been bleeding the fuel and cranking the engine for 3 days.
It shows no sign of starting up.

I feel I'm forgetting something simple here, I have checked all fuses, I checked I have fuel at the injectors.
Can anyone think of something else I should check ?
I don't know what to do at this point.

Any advise please?

Thanks

Kev
Post #870099 28th Nov 2020 2:22pm
View user's profile Send private message View poster's gallery Reply with quote
Kevlar



Member Since: 28 Oct 2020
Location: Prague
Posts: 78
Czech Republic 2010 Defender 90 Puma 2.4 SW Santorini Black
I’m going to change the Cam Sensor after studying other threads here, I hope it solves it.
Post #870141 28th Nov 2020 6:43pm
View user's profile Send private message View poster's gallery Reply with quote
Tomotomo



Member Since: 13 Feb 2018
Location: Bucks
Posts: 71
United Kingdom 
Maybe see if it will fire up with a squirt of easy start... just as an experiment
Post #870265 29th Nov 2020 3:05pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums