DEFENDER2.NET - View topic - Any joiners? timber size for stud wall

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Off Topic > Any joiners? timber size for stud wall

Page 1 of 1

Print this entire topic ·

Mean Green

Member Since: 15 Sep 2011
Location: South Ayrshire
Posts: 280

Any joiners? timber size for stud wall

I need to build a stud wall for an ensuite. I am happy with the build and how to put it all together, but I am confused (confused myself) about the timber size.

I ideally want to make the wall about 100mm thick to the finished plaster faces and I planned to use CLS. There will be a door in the wall - as far as I can see standard door frames are 115mm (which i could live with), so assuming I use 12.5mm plasterboard on both sides and allow 6mm for plaster skim (3mm each side) that leaves 84mm for framing. CLS comes in 63x38 and 89x38mm widths. Therefore 1 is too wide and the other is too narrow - assuming the edge of the door frame wants to be flush with the finish plaster (and then the facing on top).

So how do I do it - or am i missing something?

16th Nov 2017 4:39pm

ibexman

Member Since: 13 Dec 2008
Location: Essex
Posts: 2967

For 3x2 use 4 and a quarter lining and 4x2 5and a quarter lining or convert that to mm old school me

16th Nov 2017 4:43pm

DonH2000

Member Since: 12 Jan 2015
Location: North Kent
Posts: 551

2009 Defender 90 Puma 2.4 XS CSW Santorini Black

I am not a joiner but I used to have a laugh that at B&Q you used to be able to buy 2 meters of 4" x 2".............

Sorry I know this is of no help at all...... Cheers Don.

16th Nov 2017 4:58pm

ibexman

Member Since: 13 Dec 2008
Location: Essex
Posts: 2967

Gif using CLS cut linings to suit

16th Nov 2017 5:03pm

Mean Green

Member Since: 15 Sep 2011
Location: South Ayrshire
Posts: 280

Ah! Perfect!

Knew there must be an easy answer! 108mm door frame.

Cheers

16th Nov 2017 5:04pm

What puddle?

Member Since: 25 Oct 2013
Location: Reading
Posts: 952

...or
2 x 9.5 mm plasterboard = 19mm
CLS = 89mm
plaster skim @3.5mm = 7mm (plasterers love it when you tell them to apply 3.5mm!)
= 115mm Now left.

16th Nov 2017 6:34pm

BarryT

Member Since: 17 Feb 2015
Location: not far from RED WHARF BAY
Posts: 117

2015 Defender 90 Puma 2.2 XS CSW Corris Grey

4"x2" (100mmx50mm) or 3"x2" (75mmx5omm) both are perfectly adequate for a stud partition, don't forget the insulation.

16th Nov 2017 7:29pm

defender9

Member Since: 12 Mar 2016
Location: Fylde Coast
Posts: 1629

2015 Defender 90 Puma 2.2 SW Keswick Green

I have just finished a stud wall in the bedroom, used 4x2 strengthened with ply on one side then 12mm plasterboard both sides.

16th Nov 2017 9:14pm

Martin 01

Member Since: 13 Feb 2012
Location: East Yorkshire
Posts: 502

ibexman wrote:
For 3x2 use 4 and a quarter lining and 4x2 5and a quarter lining or convert that to mm old school me

As above + 100mm Rockwell insulation.
And yes I’m a chippie

16th Nov 2017 10:35pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum