↓ Advertise on Defender2 ↓

Home > Technical > Td5 fuel pressure regulator
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Alextd5



Member Since: 11 Feb 2017
Location: Gloucestershire
Posts: 322
United Kingdom 2006 Defender 90 Td5 XS CSW Bonatti Grey
Td5 fuel pressure regulator
Working out the correct part for my td5 defender

Most parts for Land Rover online will say suitable for either 1a 2a or 3a and 6a defenders, how do I know which one one is ? Can't find either in vin ?!

I'm sure the part needed for 2005 defender is LR016318? 3 pipe ? Parts removed says MSO000030 but cannot find this one at all. Gasket part number I believe is MSX000010

Anyone know ?

Is it possible to fit the wrong one? I know it's obvious and it will either has a 2 or 3 pipe entry but are they more than one of each ?

Many thanks

Alex
Post #654438 2nd Oct 2017 9:13pm
View user's profile Send private message View poster's gallery Reply with quote
dorsetsmith



Member Since: 30 Oct 2011
Location: South West
Posts: 4554
Td5 fuel pressure regulator

2 pipe fuel pressure regulator is used on 10 P head 1989 to 2001 fuel retunes inside head

3 pipe fuel pressure regulator is used on 15 and 16 P head pos 2001 to 2006 fuel retunes outside head retune pipe work runs from front engine back to fuel pressure regulator

MSX000010 Gasket part number for fuel pressure regulator below

LR016318 3 pipe fuel pressure regulator

----------------------------------------------------------------------------------------------------

MSO000030. is old part number for Land Rover Discovery 2 2002 to 2004 TD5 fuel pressure regulator S/S LR016318
Post #654441 2nd Oct 2017 9:26pm
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6519
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
Only 1 of each type - so either 2 pipe (10P engine up to and including 2001 model year) or 3 pipe (15P engine 2002 model year onwards).

The 1A/2A/3A etc you can't find in the VIN is the last two characters before the final six numbers. So lop off the last 6 numbers, then the last 2 on what is left is the model year code (A-Y, 1-9) plus the assembly location (A = Solihull).  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #654453 2nd Oct 2017 10:06pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Alextd5



Member Since: 11 Feb 2017
Location: Gloucestershire
Posts: 322
United Kingdom 2006 Defender 90 Td5 XS CSW Bonatti Grey
Cheers!

I didn't know if the diaphragm was different etc. I guessing the MSO000030 was fitted to disco and defenders when new ? As it the original one.

Alex
Post #654454 2nd Oct 2017 10:08pm
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6519
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
MSO000030 doesn't appear in the parts catalogue, it may be a production part number, or a casting/sub-assembly part number that can't be bought on its own.

But there have been a couple of supercessions, ending up at LR016318 for the 3 pipe and LR016319 for the 2 pipe.  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #654455 2nd Oct 2017 10:12pm
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums