DEFENDER2.NET - View topic - Can anyone help with switch wiring (heated seats)

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Can anyone help with switch wiring (heated seats)

Page 1 of 1

Print this entire topic ·

Welkman

Member Since: 02 Nov 2014
Location: Essex colchester
Posts: 333

Can anyone help with switch wiring (heated seats)

Hi guys,

I have fitted an exmoor trim heated seat unit which consists of a relay with four wires coming from it going to a three way switch (circuit on for low, circuit on for high, off). The switch at the moment lights up green all the time and gives 12v to the heater elements only when switched to low, it should only light green on low, be off when the seats are off and red when switched to high power. Under high power no power goes to the seats.

I did cut and extend the loom as it was too short but have checked continuity of my extensions and am 100% that they are correct.

I have not tried moving the connections on the switch yet as I am fairly certain that it would not have come from the factory incorrectly connected?

Any ideas on what to check?

Cheers James

28th Jul 2017 7:54pm

pepethekingprawn

Member Since: 12 Jan 2016
Location: Lancashire
Posts: 54

1989 Defender 90 V8 Petrol ST Auto Chawton White

Where are you getting 12v supply from? Did the kit come with a wiring diagram?

31st Jul 2017 1:44pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum