![]() | Home > Maintenance & Modifications > Puma/tdci front seats on tdi rails? |
![]() ![]() |
|
|
grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4801 ![]() ![]() ![]() |
I think the design remained the same from 1989 on
![]() 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
![]() |
|
zsd-puma Member Since: 09 Aug 2016 Location: Kent Posts: 2720 ![]() ![]() ![]() |
front seats should be a straight swap however you do it.
What do you mean by rear tip up ones? Forward facing ones in the boot will need a bit of work, as the wheel arches are stepped on Puma's but it's not impossible. 2nd row will fit a 110 with a bit of fettling to the brackets at the sides (which the back of the seat sits on) as the angle on the front of the wheel arch is slightly different i think. Obviously you'll need the central floor mount bolting in too. |
||
![]() |
|
Kit Member Since: 12 Feb 2016 Location: Shropshire Posts: 1110 ![]() ![]() ![]() |
Ahh they're actually from a late Td5
![]() 1956 Series 1 Hard-top 1958 Series 1 Soft-top |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
