DEFENDER2.NET - View topic - TD5 centre console and dash binnacle tabs.

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > TD5 centre console and dash binnacle tabs.

Page 1 of 1

Print this entire topic ·

DC101

Member Since: 01 Jul 2012
Location: Pudsey, West Yorkshire
Posts: 271

2005 Defender 110 Td5 CSW Zambezi Silver

TD5 centre console and dash binnacle tabs.

Hi,

Two of the top three tabs on my centre console are broken, as per photo:-

Click image to enlarge

Any solutions, or am I to hunt around for a good used item?
I appear to have a similar problem with the bottom part of my dash binnacle.😟

With thanks

25th Jul 2016 10:15pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6772

Can't see the pic. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

25th Jul 2016 11:00pm

DC101

Member Since: 01 Jul 2012
Location: Pudsey, West Yorkshire
Posts: 271

Click image to enlarge

Thanks, try again!

25th Jul 2016 11:31pm

lightning

Member Since: 23 Apr 2009
Location: High Peak, Derbyshire
Posts: 3516

Probably easiest to get a replacement, check to see how much it costs new. You could cable tie it in place by drilling a hole in the remains of each mounting, plus another in the main dash where the mounting is, then put a cable tie through both holes.

26th Jul 2016 7:55am

Anderzander

Member Since: 08 Feb 2011
Location: Lancashire
Posts: 1000

You can buy them new, but they are quite expensive, and second hand they seem very sought after - so I'd try gluing new tabs on first. I've not done it myself, but abs plastic is supposed to be quite easy to work with.

Having said all that - if you do buy a replacement I'd buy this broken one, which might offset some of your costs?

26th Jul 2016 8:11am

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6772

Just use a big washer under each screw to clamp it down. It's not and area that should get much pulling about. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

26th Jul 2016 12:23pm

DC101

Member Since: 01 Jul 2012
Location: Pudsey, West Yorkshire
Posts: 271

Thanks All.

Replacements appear rare, and had a quick look on-line last night- £180 from a supplier!
I'll try the washer route and see how it hangs on!

Cheers,

Robin

26th Jul 2016 12:40pm

Clive

Member Since: 21 Mar 2014
Location: Littleborough
Posts: 467

2004 Defender 90 Td5 X-Tech LE Zambezi Silver

I've successfully repaired a couple of very similar broken tabs on the instrument (Clocks) binnacle on my 90.

I found a bit of a broken casing from an old scrapped TV of a similar thickness and type of plastic and fashioned some replacement tabs to fit in place of the broken off bits, then glued them in place with PVC pipe adhesive, I clamped them in place while the glue set and just tidied up around the edges and now they're as good as new.

26th Jul 2016 12:55pm

davew

Member Since: 02 Jan 2012
Location: North Yorkshire
Posts: 888

1990 Defender 90 V8 Petrol PU Auto Rioja Red

If you know anyone with a 3D printer they could print some replacement tabs for you with a suitable way to attach them to the existing surround. http://www.yorkshireoffroadclub.net/

26th Jul 2016 1:02pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6772

If I remember correctly the tabs are only like a 2 prong fork anyway so it's just the screw clamping down that holds the console in place so washers will be fine. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

26th Jul 2016 3:59pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum