DEFENDER2.NET - View topic - REPLACE TD5 FRONT DISCS

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > REPLACE TD5 FRONT DISCS

Page 1 of 1

Print this entire topic ·

Mudlark46

Member Since: 27 Mar 2016
Location: Yorkshire
Posts: 8

2005 Defender 110 Td5 XS CSW Corris Grey

REPLACE TD5 FRONT DISCS

Hi, new to site. I have a 2005 110 TD5 and need to change the front discs. Done this several times on older Defenders and classic Range Rovers with no problems. However I didn't have to deal with ABS etc and the hub/wheel bearings had a nut and locknut, not shims. Any advice or encouragement.

27th Mar 2016 9:12am

Disco_Mikey

Member Since: 16 Nov 2014
Location: Dundee
Posts: 532

2009 Defender 110 Puma 2.4 DCPU Keswick Green

In theory, if there is no play in the bearings before removal, there will be no play when refitting

The ABS ring is held on with 5x 10mm nuts accessed between the hub and disc. With this removed, it allows access to the disc retaining bolts, as per normal

27th Mar 2016 10:04am

Mudlark46

Member Since: 27 Mar 2016
Location: Yorkshire
Posts: 8

Thanks for that, hope it's as simple as it sounds. will the ABS ring only go back in the correct position or does it need marking before removing ?

27th Mar 2016 11:27am

JWL

Member Since: 26 Oct 2011
Location: Hereford
Posts: 3443

Forgive me if I am wrong as it's a couple of years ago since I changed my front discs but the Defender abs is read from the hub under the swivel pin therefore no ring on the back of the disc whereas a Disco II has the ring on the back of the disc.

27th Mar 2016 11:47am

Disco_Mikey

Member Since: 16 Nov 2014
Location: Dundee
Posts: 532

Indeed. Rear discs have the ring behind the discs, front discs are read off the CV joint

Teach me not to read the post properly

Disco 2 is read from inside the hub assy

Last edited by Disco_Mikey on 27th Mar 2016 11:57am. Edited 1 time in total

27th Mar 2016 11:56am

Mudlark46

Member Since: 27 Mar 2016
Location: Yorkshire
Posts: 8

Thanks for that I will investigate. I did realise that the Disco hub is non-serviceable and the 110 is serviceable. My old press-release 1983 110 didn't have things like ABS, so all a bit new to me, never had a problem with any of these bits even though I've had this TD5 110 for 11yrs

27th Mar 2016 11:56am

Fatboy Slim

Member Since: 04 Feb 2008
Location: Bridgend
Posts: 1006

You'll be fine. You don't need to touch any ABS components on a disc change.

27th Mar 2016 12:00pm

jimbob7

Member Since: 06 Jul 2013
Location: uk
Posts: 2055

This/\/\/\
Front ABS is read off the shaft not the hub, as is the rear.However removing the drive member can be a REAL pita!! Pov.spec,ftw. 2006, 110,TD5.

29th Mar 2016 1:06pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum