DEFENDER2.NET - View topic - Td5 starting problem

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Td5 starting problem

Page 1 of 1

Print this entire topic ·

Lwb97

Member Since: 10 Sep 2015
Location: Powys
Posts: 75

Td5 starting problem

Hello, I have just bought a 2002 td5 90. There is no ignition live at the main relay. There is 12 volts at the inertia switch. When the brown wire from the inertia switch goes into the bulkhead and back out to the plug on the bulkhead it is down to 2 volts?. I was wondering could anybody help me, by telling me where the brown wire from the inertia switch goes in the bulkhead? Am I correct in thinking that there could be a possible break somewhere?, thanks

10th Sep 2015 10:23pm

roel

Member Since: 08 Aug 2009
Location: Lelystad
Posts: 2039

Is the inertia switch itself still OK. Mine is broken too. I jst conected the wires and it runs again. Roel

1984 90 2.5 na Diesel - RR V8 (1994-2001)
1997 Camel Trophy Discovery 300TDI (2001-2009)
2005 G4 Discovery III 4.4 V8 (2008-2018) It's gone but it still hurts.
2003 90 Td5 (2009-now)

10th Sep 2015 10:28pm

Lwb97

Member Since: 10 Sep 2015
Location: Powys
Posts: 75

Yep tried that, made no difference

10th Sep 2015 10:37pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

From inertia switch go to coil on R100 main relay under the drivers seat yes wiring break run temporary wire from inertia switch to coil on the main relay

11th Sep 2015 8:21am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum