 | Home > Maintenance & Modifications > Second row seat mounts - Favour please? |
 
|
|
|
| shaggydog Member Since: 12 Aug 2012 Location: Kent Posts: 3347   
|
I think I may have the ones you want but they may be a bit early for your vehicle?
Ether way I can take a few photos tomorrow and upload them to see if they are relevant? From what I gather the ones in the rear of a 110/130 until the 60/40 arrangement were the same as in the back of a 109 Series 3  Looking at the latching arrangement I can quite believe it.
Will upload tomorrow if its of any help  Running Restoration Thread http://www.defender2.net/forum/post323197.html#323197
Self confessed mileage hunter  |
||
12th May 2015 11:41pm |
|
| landroverdiver Member Since: 13 Jun 2009 Location: Renfrewshire Posts: 193 
|
That would be great, thanks
|
||
|
13th May 2015 6:27am |
|
| shaggydog Member Since: 12 Aug 2012 Location: Kent Posts: 3347
|
Photos as requested.
They may not be of any use as they were done rather quickly in my lunch break - if they are no good or you want another angle let me know and I will do my best.  Click image to enlarge 3/4 view on passanger side twin. Click image to enlarge Driver side twin Click image to enlarge Passanger side twin Click image to enlarge Latch when seat down (please excuse the filth  )
Click image to enlarge Latch on plinth on tub. Click image to enlarge Latch on seat Hope they help  Running Restoration Thread http://www.defender2.net/forum/post323197.html#323197
Self confessed mileage hunter |
||
|
13th May 2015 11:09pm |
|
| landroverdiver Member Since: 13 Jun 2009 Location: Renfrewshire Posts: 193
|
Many thanks, that's just what I needed.
Interesting, I expected the double mounts would have had both seat leg feet inboard or outboard, but it appears to be one is inboard and one is outboard. I have bought second hand seat frames, new mounts, and new exmoor high back seats. As I am converting from 60/40 I don't have a reference point. I will dry fit them, make sure everything lines up before I start drilling! That's very useful, thank you for doing this. Mike |
||
|
14th May 2015 7:06am |
|
| shaggydog Member Since: 12 Aug 2012 Location: Kent Posts: 3347
|
Not a problem
Running Restoration Thread http://www.defender2.net/forum/post323197.html#323197
Self confessed mileage hunter |
||
|
15th May 2015 12:30pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
