DEFENDER2.NET - View topic - Alive Tuning Dynamat Package

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Alive Tuning Dynamat Package

Page 1 of 1

Print this entire topic ·

Alive Tuning

Member Since: 01 Mar 2010
Location: Louth
Posts: 610

Alive Tuning Dynamat Package

A full Dynamat soundproofing package conducted on a 2.2 90. Every nook and cranny has been carefully layered with dynamat to stop any unwanted noise and vibration.

If you would be interested in one of our soundproofing packages then give us a call on 01472 812 900.

Best Regards

Alex Divers

Click image to enlarge

Click image to enlarge

Last edited by Alive Tuning on 23rd Mar 2015 2:01pm. Edited 2 times in total

23rd Mar 2015 1:03pm

Roz Dev

Member Since: 09 Dec 2014
Location: East Coast
Posts: 72

2015 Defender 110 Puma 2.2 SW Keswick Green

Pictures are so small, can't really see the workmanship?

23rd Mar 2015 1:42pm

Alive Tuning

Member Since: 01 Mar 2010
Location: Louth
Posts: 610

Give a boy a mans job, eh?

I'm stacked out tuning loads of 2.2 Defenders for Urban Truck and SMC, and then this happens!

All sorted now, so I'll disappear back into my underground lair.

Regards,

Gary.

23rd Mar 2015 2:05pm

Rudski

Member Since: 13 Jul 2014
Location: Lake District
Posts: 141

I never want to see another bit of dynamat for a long time, just spent the weekend doing the back tub, everything in the front and all the doors, my hands look like I've been attacking myself with a razor blade. Can't stomach the roof, but what a difference it's made

Fitted the Bilstein shocks and damper with rear roll bar from yourselves no more rolling around the corners, have to save up for before swapping the 16 " sawtooths for 18s with a more road bias tyre but the defenders progressing nicely.

Sorry went a bit

there.

23rd Mar 2015 8:43pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20833

If you'd have posted here I'd have advised you to wear gloves.

Just ask killer.

On a serious note though, gloves are a very good idea it is very sharp when installing.

23rd Mar 2015 9:04pm

Rudski

Member Since: 13 Jul 2014
Location: Lake District
Posts: 141

I had gloves initially but seem to spend more time trying to remove the stuff from my gloves

then the dog walked in with bits stuck to his paws that had to be cut out

Bad books for me me from SWMBO

23rd Mar 2015 11:22pm

noworries4x4

Member Since: 24 Dec 2010
Location: Newton Abbot Devon
Posts: 1195

Ohhhh think you have got problems ??? The Jack Russell was out with me in the workshop while I was servicing the fullfat and she decided to walk under it and get oil all down her back (tri colour mainly white) I did not notice of course and then she went and sat and rolled on the sofa and got it on the Rotty as well. Guess who is in the dog house now ?? If everything is under control you are not going fast enough.

Every Day 16 MY Discovery 4 Commercial Workshop and Escort Vehicle
Weekends 07MY L322 TDV8 Vogue SE
Series 1 80" 3ltr 6cyl with overdrive
No Worries 4X4

24th Mar 2015 11:52pm

Rudski

Member Since: 13 Jul 2014
Location: Lake District
Posts: 141

And who said they were mans best friend

25th Mar 2015 8:50am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20833

Oh dear.

25th Mar 2015 10:10am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum