 | Home > Group Buys > Nakatanenga Third Group Buy Stainless Bolt Kits |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 
|
|
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8578  
|
So not too many mishaps with UPS vans between Halifax and France then?
Good, I am glad 
Local Interlink courier driver slid into a parked car recently. Since some of the Interlink drivers are self employed the £££'s were out of his back pocket. UPS driver collected consignments today including another 3 bolt kits at 11.50. Having such an early collection can be a bit of a pain in the proverbial. Brendan |
||
4th Feb 2015 10:03pm |
|
| JAY BOY Member Since: 04 May 2010 Location: Not here Posts: 1706 
|
Mine has arrived. Not opened the box yet.
Cheers Brendan |
||
|
4th Feb 2015 10:06pm |
|
| Vince VDB Member Since: 17 Nov 2014 Location: Champagne sur Oise Posts: 60  
|
No problem. Now, some new UPS vans can cross the Channel very quickly ! 
 Defender 110 Puma 2.4 SW SE
Defender 90 300 Tdi SW with TD5 body Land 90 V8 HT |
||
|
5th Feb 2015 12:18am |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8578
|
I will have to inspect the UPS van tomorrow for sign of inflatable floats and a propellor at the back. Normally we have scraps down the sides due to the local dry stone walls. They gave our regular driver a longer van last week, it lasted a day before it had battlescars from the dry stone walls. Following day he was back on standard length van. Brendan |
||
|
5th Feb 2015 12:27am |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 19568
|
With the metal in it I'm surprised it isn't dragging itself along.
 |
||
|
5th Feb 2015 12:31am |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8578
|
More bolt kits arrived today on the pallets today.
Click image to enlarge Should keep us going for a week or two |
||
|
5th Feb 2015 9:33pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 19568
|
Busy today Brendan by the look of it.
|
||
|
5th Feb 2015 9:40pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8578
|
Just another day at the office Steve.
Tomorrow off to see a manufacturer with some drawings for a new product.
There is never an average/normal day in my 'office' have some interesting visitors coming around, some interesting phone calls etc. Brendan |
||
|
5th Feb 2015 10:48pm |
|
| jomara Member Since: 26 Oct 2009 Location: Lanarkshire Posts: 1756 
|
Box of goodies arrived a short while ago, thanks Brendan
Now to get the tools out!! 2014 110 2.2TDCi XS Station wagon 1971 Bowler Tomcat 88 4.2 V8 Auto 2022 110 250D XS |
||
|
10th Feb 2015 4:45pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8578
|
Just be careful with your tools this time.
Do not want any more 
Brendan |
||
|
10th Feb 2015 5:00pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 19568
|
Stainless front door strips next to go in on mine.
Already done the rear, little point in taking photo's.  |
||
|
10th Feb 2015 5:58pm |
|
| jomara Member Since: 26 Oct 2009 Location: Lanarkshire Posts: 1756
|
Thankfully its all healing up now 2014 110 2.2TDCi XS Station wagon
1971 Bowler Tomcat 88 4.2 V8 Auto 2022 110 250D XS |
||
|
10th Feb 2015 7:23pm |
|
| Bev Member Since: 03 Apr 2013 Location: Perthshire Posts: 266 
|
starting fitting mine today - whilst all the packs are labelled and most self explanatory i'm struggling to find out where all the bolts actually go.....
For example the front grille is easy enough - 8 screws on the grille - but where do the other bolts go as its not as obvious? Click image to enlarge Click image to enlarge Where do these go? Click image to enlarge And finally the load area - do these replace the existing screws in the strip along the bottom of the floor plate? not sure about the " reflectors " though as mine don't appear to Bolt in? Click image to enlarge Yes basic questions I know however I am normally the wrong tool for the job is there a definitive guide as to where all the bolts / screws go? 2002 Td5 | 90 County Station Wagon | Oslo Blue
2006 Td5 | 90 County Station Wagon | Tonga Green (Gone ) 2002 Td5 | 90 County Station Wagon | Zambezi Silver (Gone) |
||
|
10th Feb 2015 9:44pm |
|
| Pipmac Member Since: 01 Mar 2014 Location: Knutsford Posts: 23 
|
I've the same issue, all the bolts but no clear instructions for where I look to swap them over. Do instructions exist.
|
||
|
10th Feb 2015 10:19pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
