Member Since: 16 Feb 2009
Location: Miserable Midlands
Posts: 3015
Help needed- anyone a machineist/ knows a good one?
As some/ most of you know I am now sunning it up in Afghanistan. Anyhow, I am in charge of maintaining a fleet of EOD robots, weapon systems and camera systems...and in the MODs infinate knolwedge they have supplied me with a robot and a cable drum, but forgot to work out a way of attaching the drum to the robot . I have worked out that if I can get a stud made it will be a easy fix .
I am looking at a 12.5mm diamiter center of about 6mm long and at either ends a thread (both right handed).
First end is a M10 thread and needs to be 20mm long.
The other end needs to be 1/4- 20 thread and needs to be 15mm long.
I am currently trying to draw something on my computer that will give a btter idea........any of you think you could help? (looking at you Mal!)
Cheers,
Glyn
Oh yeah, I will be looking at about 10 of these.
8th Apr 2010 9:13am
Glynparry25
Member Since: 16 Feb 2009
Location: Miserable Midlands
Posts: 3015
It is a bit Fish shop but must give you an idea
Glyn :sheep:
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
. I have worked out that if I can get a stud made it will be a easy fix 
8th Apr 2010 9:33am
