 | Home > My Defender > g-macks 110 300 tdi thread |
 
|
|
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967  
|
managed to tackle a few jobs today,
new crystals with new housing nuts bolts screws and bezels and liberal amounts of acf-50  Click image to enlarge also fitted snow cowl which was a tenner off killer! (chris) Click image to enlarge then it was on to fitting a rear recovery point. had it on a while but just beefed it up a bit with front and rear steel plates. still need to a bottom bar to bolt under it for max strength Click image to enlarge also bought a used wheel mount for a tenner! wanted the wheel out the boot! it will suffice until i get a swing away! Click image to enlarge My 109 thread my youtube channel |
||
30th Jul 2015 8:13pm |
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967
|
put some 18mm chip board over wheel boxes and carpeted it, so mutts can sit in comfort and i can carry all my
 !
Click image to enlarge My 109 thread my youtube channel |
||
|
30th Jul 2015 8:16pm |
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967
|
and just a few gratuitous shots for the hell of it
Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge My 109 thread my youtube channel |
||
|
30th Jul 2015 8:19pm |
|
| familymad Member Since: 13 Dec 2011 Location: Bucks Posts: 3502  
|
They weren't on my list but make it even better ......
 1951 80" S1 2.0
1995 110 300TDI 1995 90 300TDI |
||
|
31st Jul 2015 8:56am |
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967
|
your list is too expensive
next little jobs i think will be replacing indicators with LEDs (already have back ones) and a number plate led. Also want fuse box in boot somewhere to power some extra internal & external lights and other stuff. My 109 thread my youtube channel |
||
|
31st Jul 2015 10:44am |
|
| shaggydog Member Since: 12 Aug 2012 Location: Kent Posts: 3347 
|
Perhaps a subsidy would help 
Looking Great, I must get round to replacing my cappings with the galvanized ones i bought for last years rebuild. I keep tripping over the damn things! Running Restoration Thread http://www.defender2.net/forum/post323197.html#323197 Self confessed mileage hunter  |
||
|
31st Jul 2015 12:48pm |
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967
|
good idea shaggy, familymad can pay me monthly by DD i thing £450 pcm should cover what he wants done and anything i think should be added
then at the end of say 10 year when i have a fully restored tdi he can have first refusal IF i decide to sell  My 109 thread
my youtube channel |
||
|
31st Jul 2015 7:59pm |
|
| shaggydog Member Since: 12 Aug 2012 Location: Kent Posts: 3347
|
I do love a plan
Running Restoration Thread http://www.defender2.net/forum/post323197.html#323197
Self confessed mileage hunter |
||
|
2nd Aug 2015 12:42pm |
|
| familymad Member Since: 13 Dec 2011 Location: Bucks Posts: 3502
|
Cash or cheque
1951 80" S1 2.0
1995 110 300TDI 1995 90 300TDI |
||
|
2nd Aug 2015 5:49pm |
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967
|
Added last of the LEDs today, clear on front but Amber on back.
Also put the sidelights under the indicators for a more pleasing (to me) look when lights r on Will get pic of that later Click image to enlarge My 109 thread my youtube channel |
||
|
4th Aug 2015 8:37pm |
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967
|
another quick shot taken this morning
Click image to enlarge My 109 thread my youtube channel |
||
|
5th Aug 2015 3:01pm |
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967
|
removed turbo yesterday to have a look at waste gate and actuator.tried all sorts to get it to move without removing everything but couldn't. so decided best way to be 100 % sure is remove it all and check it that way!
once removed i still couldn't move it!! the circlip was snapped and corroded into the groove of the actuator rod. once i had dug all that out it was moving freely again! can't get it back together yet though as I'm waiting for a oil return gasket, an O ring for oil supply and a new circlip. a genuine circlip is £35 !!!!!!!!!! 
ordered one of ebay for £2.50 Click image to enlarge My 109 thread my youtube channel |
||
|
17th Aug 2015 1:34pm |
|
| g-mack Member Since: 07 Jan 2014 Location: northumberland Posts: 1967
|
new stereo
Click image to enlarge My 109 thread my youtube channel |
||
|
2nd Sep 2015 7:49pm |
|
| jk84 Member Since: 17 Feb 2015 Location: Wherever my Defender takes me... Posts: 720 
|
g-mack, really like the look of your truck! And great pictures you have posted, just went through your thread. Looks a nice purposeful landy, they have quite a charisma when they've been around and served for a litttle while. And looks you're looking after it very well. Btw, modulars look great on it
 |
||
|
3rd Sep 2015 7:04pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
