DEFENDER2.NET - View topic - need help removing standard radio

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > need help removing standard radio

Page 1 of 2

Print this entire topic ·

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20912

need help removing standard radio

hi i'm new on this forum and i recently got my new 90 puma but i wanted to remove my standard radio however i have found this to be more difficult than i imagined i have tried all sorts exact fitting wire in all for holes moving it about ect and i've also tried allen keys however nothing has worked and also i would like a bit of acess some how to the back as my new radio has plenty of wiring to place. any ideas?

thanks

21st Jan 2010 2:45pm

willy eckerslike

Member Since: 15 Jun 2009
Location: North yorks
Posts: 1789

2007 Defender 110 Puma 2.4 HCPU Keswick Green

If you wait I'll post you some pictures, but basically you need to do one side at a time both holes need a sike in and press the tabs towards the centre, hold that side out then repeat on the other side Original Member Pie n Pea Club.
110 HCPU Tipper

21st Jan 2010 2:58pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20912

willy eckerslike wrote:
If you wait I'll post you some pictures, but basically you need to do one side at a time both holes need a sike in and press the tabs towards the centre, hold that side out then repeat on the other side

i see if you could do that would be excellent.

21st Jan 2010 4:04pm

willy eckerslike

Member Since: 15 Jun 2009
Location: North yorks
Posts: 1789

Right I've been out and taken my stereo out

Get two samll screwdrivers and bend the ends

Insert then this far

Lever towards the centre and pull one side out a bit hold this with your third arm repeat on the other side

This is the hole

Don't forget to swap the rubber locator and try the radio before you push it home

Original Member Pie n Pea Club.
110 HCPU Tipper

21st Jan 2010 4:50pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20912

right thank you for doing this. could you tell me how deep to insirt said tool? thanks ever so much

21st Jan 2010 4:53pm

willy eckerslike

Member Since: 15 Jun 2009
Location: North yorks
Posts: 1789

Theres two photos showing that, if you aren't successful with the ethnic rigged tools go and buy a proper one from halfords

Original Member Pie n Pea Club.
110 HCPU Tipper

21st Jan 2010 4:56pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20912

yes i may have to do that as i don't have two screw drivers that size and the bits i have right now are strong but may be a shade too small. andway thank you for your help and i'll let you know. Kenwood flip out Dvd player i want put in see

21st Jan 2010 5:01pm

discocuzzy

Member Since: 16 Jul 2008
Location: surrey
Posts: 1200

willy....is that a packet a worthers originals in your motor??, the chosen weapon of choice for everyone on the sex offenders register? You cannot teach stupid people to do clever things

21st Jan 2010 5:44pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20912

i did have a go at getting it out but ran out of time with it getting dark. i did get one side unlocked but it slipped back in sadly. dam these radios are well put in

21st Jan 2010 6:20pm

fekete

Member Since: 24 Dec 2008
Location: Here on the other end of the computer
Posts: 3626

2007 Defender 90 Puma 2.4 HT Bonatti Grey

konabikes11 wrote:
i did get one side unlocked but it slipped back in sadly. dam these radios are well put in

Bring it up north... the kids will have it out in seconds

NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY

21st Jan 2010 6:25pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20912

im going to try some universal radio removal keys i think

21st Jan 2010 6:49pm

fekete

Member Since: 24 Dec 2008
Location: Here on the other end of the computer
Posts: 3626

Just take it to halfords or to a garage they will help you NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY

21st Jan 2010 7:29pm

willy eckerslike

Member Since: 15 Jun 2009
Location: North yorks
Posts: 1789

discocuzzy wrote:
willy....is that a packet a worthers originals in your motor??, the chosen weapon of choice for everyone on the sex offenders register?

Off course

I also carry some puppies Original Member Pie n Pea Club.
110 HCPU Tipper

21st Jan 2010 7:47pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20912

thanks for your help lads (especially the pictures) i went down to Halfords today got some universal keys came out perfect my problem was getting the grip to slide it out. thanks

22nd Jan 2010 5:52pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6198

A friend of mine with an 04 Td5 90, his stereo (wasn't the CD player, just the tuner & tape) looked like it was held in, in a similar fashion, but they were 4 small allen keys.

I had to scratch my head for a while when he came over asking me to whip his stereo out (he bought a decent CD player), i tried the "yeah, it's easy, just stick 2 small screwdrivers in like this......." and faffed about for 5 minutes looking stupid

got my small allen keys, and they "unwound" and the stereo came out.

it was a proper branded LR one too.

23rd Jan 2010 8:40am

Page 1 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum