DEFENDER2.NET - View topic - "Y" connections for the Cruise Control installatio

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > "Y" connections for the Cruise Control installatio

Page 1 of 1

Print this entire topic ·

dgardel

Member Since: 30 Nov 2008
Location: Veneto (Heart & Head)
Posts: 3586

"Y" connections for the Cruise Control installatio

Normally, I do not like to "cut" the original harness/wiring......

So for the installation of the cruise control it is necessary 3 "Y" connections

1. the throttle (provided by the kit seller)
2. The clutch switch (normally the installation need to "current steals" (that I hate, I do not know the correct translation)
3. The brake switch C0029L (the right switch, not the left), same as point 2.

So I create my own "Y"

The brake one isn't easy, I bought the female (Motorcraft) from USA and I create the male one sacrificing a new brake switch

Click image to enlarge

Click image to enlarge

everything flooded with hot glue

Click image to enlarge

and the clutch "Y" (commercial connectors)

Click image to enlarge

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition

IID Pro MV License

8th Mar 2013 8:10pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum