 | Home > Maintenance & Modifications > Snow cowl |
 
|
|
|
| TooTall Member Since: 10 Jul 2012 Location: Fens Posts: 504   
|
Fitted mine last month, takes a matter of minutes.
Remember to take off the old vent first - just to enable you clean out the heater well, before then refitting the original vent; as the snow cowl fits on top of the OEM. Regards M "Ease your worries, Clear-up your woes, Go into your garage & put stuff into rows." |
||
16th Oct 2012 12:08pm |
|
| Timo K Member Since: 23 Aug 2012 Location: Helsinki Posts: 169 
|
Makes a big difference here in Finland during the winter. The heater breathes much better after a snowfall when the heater duct isn't full of snow... Snow in the duct also makes the air pulled into the cabin quite humid, so fogging of the windows is also reduced. Good buy for me atleast.
|
||
|
16th Oct 2012 1:11pm |
|
| Defender-Stu Member Since: 14 Jun 2012 Location: South West England Posts: 1320
|
i Would be interested to see what its like as i have in mind to order one but not sure as of yet as in this thread there are a few more options: http://defender2.net/forum/topic15498.html
 |
||
|
16th Oct 2012 1:17pm |
|
| TooTall Member Since: 10 Jul 2012 Location: Fens Posts: 504
|
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  "Ease your worries, Clear-up your woes,
Go into your garage & put stuff into rows." |
||
|
16th Oct 2012 1:22pm |
|
| familymad Member Since: 13 Dec 2011 Location: Bucks Posts: 3467  
|
Looks great. thanks for the gen 1951 80" S1 2.0
1995 110 300TDI 1995 90 300TDI |
||
|
16th Oct 2012 3:08pm |
|
| mermoto Member Since: 21 Sep 2011 Location: Essex Posts: 326 |
Glad I had my one on last winter. Would rather like a black stainless steel version now though
Click image to enlarge Mermoto |
||
|
16th Oct 2012 8:50pm |
|
| me@td5.org Member Since: 16 Jan 2011 Location: Warwick Posts: 856 
|
I really like the IRB developments ones in Aluminium.
|
||
|
16th Oct 2012 9:50pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 
|
i have on order a entreq one through Brendan (leeds) best one i have ever seen that extra bit of money makes alot of difference, getting it plain to pain it white or green
CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
16th Oct 2012 10:22pm |
|
| XS Pete Member Since: 13 Jan 2011 Location: Suffolk Posts: 632  
|
Wise choice K90. You will not be disappointed with the quality. Did you order the gasket as well?
I fitted mine with with the Entreq cowl on top of the gasket on top of the original vent. This gave a nice little extra clearance between the cowl and the wing where it curves over. Without it I thought it was a bit close for comfort, and it also makes it watertight so that no surface water on top of the wing can creep under the edge of the cowl and into the heater box. Click image to enlarge Pete |
||
|
16th Oct 2012 11:21pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
bit of luck you said Pete
Brendan should have some hopefully, got to say that landy of yours is stunning, the grill alone transforms it so much  CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
17th Oct 2012 12:14am |
|
| ericvv Member Since: 02 Jun 2011 Location: Near the Jet d'Eau Posts: 5816  
|
Paint it RED!!!! .......Almost X-max You never actually own a Defender. You merely look after it for the next generation.
http://youtu.be/yVRlSsJwD0o https://youtu.be/vmPr3oTHndg https://www.youtube.com/watch?v=_GtzTT9Pdl0 https://www.youtube.com/watch?v=ABqKPz28e6A https://www.youtube.com/watch?v=rLZ49Jce_n0 https://www.youtube.com/watch?v=XvAsz_ilQYU https://www.youtube.com/watch?v=K8tMHiX9lSw https://m.youtube.com/watch?v=dxwjPuHIV7I https://vimeo.com/201482507 https://www.youtube.com/watch?v=ZSixqL0iyHw |
||
|
17th Oct 2012 5:40am |
|
| Landlord Member Since: 27 Oct 2009 Location: Hampshire Posts: 582 
|
Just ordered the Mud UK one ready for Nordkapp
2007 TD5 90 Hard Top |
||
|
17th Oct 2012 7:42am |
|
| eutek Member Since: 03 Mar 2009 Location: High Wycombe Posts: 586 
|
Me too, it was rather close to the wing without it. Put some araldite in the screws as well to keep someone from nicking it when I'm not around (based on prior experience of someone helping themselves to bolt-on accessories). I surprised as to how much "stuff" managed to get past the factory plastic grill.  |
||
|
17th Oct 2012 9:54am |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
xmas deals soon on my site aswell me thinks CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
17th Oct 2012 5:43pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
