DEFENDER2.NET - View topic - Propshaft orientation

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Propshaft orientation

Page 1 of 1

Print this entire topic ·

vulcanfreak

Member Since: 05 Sep 2010
Location: suffolk
Posts: 77

2006 Defender 90 Td5 Silver LE Zambezi Silver

Propshaft orientation

OK i am worried
i took off and replaced UJ`s on my rear propshaft this evening, when i took it off the sliding joint was closest to the axle, which i suspected was odd? On consulting the Haynes manual, which i do not always trust, the advice was to have the sliding joint closest to the transfer case, which is what i would have expected. Did a previous owner install it back to front? is the haynes manual correct? am i going mad?
Any definative answers welcome:) thanks
Kev

6th Sep 2012 11:36pm

Landlord

Member Since: 27 Oct 2009
Location: Hampshire
Posts: 582

Looks like we're working in unison, spent last evening under my TD5 replacing the propshaft and had the same question. !

Sliding joint goes nearest the transfer box - that's the way mine came off and yes Haynes manual does state it goes on that way. 2007 TD5 90 Hard Top

7th Sep 2012 6:42am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum